Here is the list :
ip_masq_vdolive
ip_masq_user
ip_masq_raudio
ip_masq_quake
ip_masq_portfw
ip_masq_mfw
ip_masq_irc
ip_masq_ftp
ip_masq_cuseeme
ip_masq_autofw
HTH
Flupke
On Mon, 15 May 2000 [EMAIL PROTECTED] wrote:
> Sorry trying to understand the HOWTO and it's not straight
> forward. Which modules are suppose to be modprobed. It
> lists several but all I want to do is share a internet
> connection(for now:).
>
> > If you just want to share your connection, you just have to go through
> > some easy steps :
> > First modprobe the necessary modules. They are listed in the
> > ipchains-HOWTO, and should already built with mandrake. The kernel should
> > also already be properly configured.
> >
> > Then enable the forwarding :
> > echo 1 >/proc/sys/net/ipv4/ip_forward.
> > If that doesn't work, that means that I was wrong and that you have to
> > make a new kernel.
> >
> > Then you tell the kernel to masq the packages that come from your intranet:
> > ipchains -A forward -s a.b.c.d/e -d 0.0.0.0/0 -j MASQ
> > where a.b.c.d is the address of your local network and e is the number of
> > bit set to 1 in your netmasq (255.0.0.0 -> 8, 255.255.0.0 -> 16,
> > 255.255.255.0 -> 24)
> > Then you set the gateway of your router to be the one of your ISP
> > For your intranet computers, the gateway is your router.
> >
> > That should do it. Of course, there are a lot of other possibilities with
> > ipchains. Thats why you should read the ipchains-HOWTO step by step.
> >
> > Maybe I forgot some steps, but these are the main ones.
> > If you have problems, tell exactly what is going wrong and post the output
> > of the ipchains -L command.
> >
> > HTH
> > Flupke
> >
> > On Thu, 11 May 2000 [EMAIL PROTECTED] wrote:
> >
> > > I have been setting up a samba server with adsl connected
> > > to several win98 boxes. I was told that to share the dsl
> > > connection all I had to do was set up IP chains. I then
> > > downloaded the current ip chains howto and am now completely
> > > lost. I read the first 4 chapters right up to where you set
> > > up the win98 boxes. Do I have to recompile the Kernel (I
> > > have never done this before); I am running mandrake 7.02.
> > > I was assuming that the IP chains was already built in. Is
> > > there a easy way to set it up. I don't mind recompiling but
> > > could use any suggestions or help that anyone could put
> > > forward.
> > >
> > > Thanx in advance
> > >
> > > Mike
> > >
> > >
> > > ....................................
> > > Get your own free email account from
> > > http://www.popmail.com
> > >
> > >
> >
> >
> >
>
>
>
> ....................................
> Get your own free email account from
> http://www.popmail.com
>
>