Joe,
LM has a c/c++ compiler that you can install during the installation process
(or after if you choose)
check under the development information during install
=>-----Original Message-----
=>From: Joe Brault [mailto:[EMAIL PROTECTED]]
=>Sent: Thursday, October 05, 2000 12:40 PM
=>To: [EMAIL PROTECTED]
=>Subject: [newbie] C++ program?
=>
=>
=>Hello all, I have aninteresting question for everyone. I am
=>in the process
=>of totally converting my systems over to Linux because i'm tired of
=>winbloze. However, In order for me to do this, I need to find an
=>ansi-standard compliant C++ compiler that runs in Mandrake.
=>Does such a
=>program exist? Free is even better! :) Any help is greatly
=>appreciated!
=>
=> - Joe :)
=>----- Original Message -----
=>From: "Joe Brault" <[EMAIL PROTECTED]>
=>To: <[EMAIL PROTECTED]>
=>Sent: Thursday, October 05, 2000 10:44 AM
=>Subject: Re: [newbie] 7.1 Install CD??
=>
=>
=>> Charles,
=>>
=>> Thanks for the instructions! They were very easy to
=>follow and helped
=>a
=>> lot! Although for some reason it kept failing on the
=>simulation of the
=>burn
=>> process... any thoughts?
=>>
=>> - Joe :)
=>> ----- Original Message -----
=>> From: "Charles A Edwards" <[EMAIL PROTECTED]>
=>> To: <[EMAIL PROTECTED]>
=>> Sent: Thursday, October 05, 2000 8:03 AM
=>> Subject: Re: [newbie] 7.1 Install CD??
=>>
=>>
=>> >
=>> > ----- Original Message -----
=>> > From: "Joe Brault" <[EMAIL PROTECTED]>
=>> > To: <[EMAIL PROTECTED]>
=>> > Sent: Wednesday, October 04, 2000 10:46 PM
=>> > Subject: Re: [newbie] 7.1 Install CD??
=>> >
=>> >
=>> > > Charles,
=>> > >
=>> > > I downloaded the image, and will be using NERO
=>Burning Rom to burn
=>> my
=>> > > CD. This program came with my CDRW drive (Creative Labs).
=>> > >
=>> > [snip]
=>> > > > Did you download the ISO image?
=>> > > > What program will you be using to burn the cd?
=>> > > >
=>> > > > Charles
=>> > > >
=>> >
=>> > Since the install ISO is 649MB you should not try to
=>burn it on a
=>650MB
=>> > blank. Pony and several others make 700MB CD-Rs but be
=>sure you do not
=>> pick
=>> > up an audio only CD-R.
=>> > NERO trys to make it hard to record from an ISO. There
=>is no info in
=>> the
=>> > manual or on their web site. Here is what you need to do:
=>> > 1) Find the folder to which you downloaded the ISOs,
=>right click on each
=>> and
=>> > choose rename;
=>> > mandrake 71-ext.iso change to mandrake 71-ext.nrg
=>> > mandrake 71-inst.iso change to mandrake 71-inst.nrg
=>> > 2) Launch NERO
=>> > 3) Close the New Compilation window so that you have only the main
=>window
=>> > open.
=>> > 4) From the toolbar along the top of the window select CD
=>Recorder/
=>Choose
=>> > Recorder and be sure your CD-RW is picked
=>> > as the recording device.
=>> > 5) From the File menu select Burn image. In the pop-up
=>window navigate
=>to
=>> > the folder with the .nrg file and click on one and click OK
=>> > 6) A Foreign Image File box will open. Click OK.
=>> > 7)A Foreign Image Setting box will open. Change it were
=>necessary to
=>show
=>> > the following values: Data mode 1; Block Size 2048: and
=>the Swapped
=>option
=>> > should be checked.Click OK.
=>> > 8) A Write CD window will open. If you have not done much
=>burning and
=>are
=>> > not familiar with your CD-RWs abilities check all 4
=>boxes, test speed,
=>> > simulate, burn, and finalize. By doing this NERO will
=>auto select the
=>burn
=>> > speed.Finally in the top right of the window click the
=>Write button and
=>> the
=>> > process of burning the CD will begin.
=>> > When the 1st CD is finished follow steps 5-8 to create the 2nd.
=>> > Hope I have not made it seem too complicated. If you have any
=>problems
=>> or
=>> > other questions you can reply to the list or, contact me
=>direct if you
=>> > choose.
=>> >
=>> > Charles
=>> >
=>> >
=>> >
=>> >
=>>
=>>
=>
=>
