Hi Mark,
I just went down the road you're on,here's what I did. I have a zoom isa
modem. Of course you have disabled pnp in the bios,and I know you have the
jumpers on the card set to non-pnp as well. I put the modem on com 3( as set
by the jumpers on the modem). I have reserved irq 5 for the modem.
Now you can use minicom to initialize the modem. The big thing for me was to
make sure pnp is disabled on the modem as well. Check your install cd for the
modem if you need further directions.
Hope this helps a bit, if not fire back a response and we'll go from there.
Good luck and hava nice wknd :)
Lee