Hi Folks,
My "lock-up" problem has been evident in every
attempt over the last few weeks to Install MD 7.2
"lock-up" occurs only in the X-windows system and
occurs in both Gnome and KDE. It is a TOTAL
System "lock-up" and the entire system just
freezes. A reboot is necessary to continue.
My Configuration is:-
TI6NL Pentium II 233MHz 440LX ATX Motherboard, chip
set Intel 82440LX.
72MB SDRAM
S3 Virge GX2 Video card with chip set 86C357 and
installed in AGP slot.
Creative Soundblaster PCI 128 in PCI slot ( and it
works very nicely)
LT Win Modem in PCI slot (it has not been
configured)
My efforts to date:-
I have tried many different types of MD 7.2
Installation, all have proceeded very well with no problems.
The end result is a very nice installation of MD
7.2, but NO change to my Lock-up problem.
I have tried some variations with Partitioning
during Install, but NO change.
I have tried various XFree86 Server combinations
for my S3 Virge video card including the S3V
server. No change to my problem.
I have looked through the Mailing list archives for
this problem, but while there has been a
few close and similar problems, the solutions
offered have not cured my problem.
I have removed my Ethernet card and a serial comms
card (Comms 3 and 4) both were PCI,
but neither were next door to the AGP card. The PCI
slot next to the AGP slot is vacant.
I thought I had made some improvement when I
removed these last two cards, possibly the
incidence of "lock-up" is somewhat less, but it
still happens.
I have looked through all of the .log files I can
find, not a mention anywhere.
Exactly what happens:-
I can move around quite freely in KDE opening
various files and programs. Netscape opens
and I can load many thing into this.
However my standard test now is to open the Xterm
in KDE. This opens OK, but as soon as
I attempt to re-size it MANUALLY, the system will
"lock-up". I can use Xterm and open it to
a full size window, it is only the MANUAL resizing
of this and other terminal windows in KDE
and Gnome that results in system
"Lock-up"
I also have random Lock-ups, always when
I am changing the Window content.....
I would appreciate some assistance in resolving
this irritating problem.
Gordon Stewart
|
- Re: [newbie] Total System "Lock-up" with MD 7.2 Gordon Stewart
- Re: [newbie] Total System "Lock-up" with MD ... civileme
- Re: [newbie] Total System "Lock-up" with MD ... Gordon Stewart