On Friday, Aug 31, 2001, Maureen L. Thomas wrote: > I upgraded the kernel from the rpm files as stated in the security > alert. I did the iptables and lm-utils with the rpm package manager. I > used the instructions that came with the security alert. > rpm -ivh kernel-2.4.7-12.3mdk.i586.rpm etc. > Rebooted with no problems. But now my modem gives me the error of "modem > is busy". I checked my rc.local file and my setserial line is still > there. I use Kppp to connect to the net. I then checked the PCI stuff and > it reads differently than before. Instead of the port being 0xdc00 as it > was it now reads dc00. It dropped the 0x. I checked my log file I keep on > all changes, etc, etc. I use an Action Tek 56K internal, model > PCI56012-02. My setserial line is as follows > > setserial /dev/ttyS3 uart 16550A irq 10 port 0xdc00 spd_vhi Just a shot in the dark, but have you tried changing it to 'port dc00' just to see what happens? -- Paul Cox <paul at coxcentral dot com> Kernel: 2.4.7-12.3mdk - Uptime: 10 days 12 hours 37 minutes.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com