On Friday 02 November 2001 10:28 am, you wrote: > Hi, > > I couldn't prevail on you to send me your kppp settings; the particulars > under the Device tab, and the "Modem commands" specifics under the Modem > tab (pre- and post-initialization delays, guard time, the Initialization > string and Dial, Hangup, Answer and Escape strings)? > > To be honest, given that it works perfectly under Windows, I'm baffled. > > Best wishes, > > Michael
I have to say that I only use the modem for connecting to the internet. I don't send any fax's or save messages or connect any speakers or microphones to it. It has always been recognised and setup automatically by mandake (7.2, 8.0 and 8.1). The only one thing I have always had to do was set the modem volume slider to the middle (Kpp Config modem tab). The default setup was always no volume and without adjusting that slider the modem would never dial for some reason. Hope these other settings might help; Under the device tab its listed as a Serial device, Modem Device: /dev/modem FlowControl: CRTSCTS Line Termination: CR Connection Speed: 115200 The "Use Lock File" is ticked Modem Timeout: 60s Modem Commands; pre-Init Delay 50 (sec/100) Init String; ATZ post init delay; 50 (sec/100) init response; OK no dial tone detection; ATX3 dial string; ATDT connect response; CONNECT Busy response; BUSY no carrier response; NO CARRIER no dial tone response; NO DIALTONE hangup string; +++ATH hangup response; OK answer string; ATA ring response; RING answer response; CONNECT escape string; +++ escape response; OK guard time; 50 (sec/50) Modem Query results; ATI: 5601 ATI1: 9DC7 ATI2: OK ATI3: U.S. Robotics 56K Message Rev. 12.1.12 ATI4: U.S. Robotics 56K Message Settings... B0 E0 F1 L1 M1 Q1 V1 X4 Y0 SPEED=115200 PARITY=N WORDLEN=8 DIAL=TONE OFF LINE &A3 &B1 &C1 &D2 &H1 &I0 &K1 &M4 &N0 &R2 &S0 &T5 &U0 &Y1 S00=000 S01=000 S02=04 ATI5: U.S. Robotics 56K Message NVRAM Settings... Template Y0 DIAL=TONE B0 E1 F1 L2 M1 Q0 V1 X4 SPEED=38400 PARITY=N WORDLEN=8 &A3 &B1 &C1 &D2 &H1 &I0 &K1 &M4 &N0 &P1 &R2 &S0 &T5 &U0 &Y1 S00=000 S02=043 ATI6: Template Y1 DIAL=TONE B0 E1 F1 L2 M1 Q0 V1 X4 SPEED=38400 PARITY=N WORDLEN=8 &A3 &B1 &C1 &D2 &H2 &I2 &K1 &M4 &N0 &P1 &R1 &S0 &T5 &U0 &Y1 S00=000 S02=043 S03=013 S04=010 S05=008 S06=004 S07=060 ATI7: Configuration Profile... Product type UK External Product ID: 01566800 Options V32bis,V.34+,x2,V.90 Fax Options Class 1/Class 2.0 Voice Options Speaker Phone, TAD Clock Freq 92. Good Luck, Robin.
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
