Damian G wrote: > Civileme, this is the output of those commands... > > [root@localhost root]# dmesg > Linux version 2.4.8-26mdk ([EMAIL PROTECTED]) (gcc version 2.96 > 20000731 (Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST > 2001 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) > BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) > BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) > BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) > On node 0 totalpages: 65520 > zone(0): 4096 pages. > zone(1): 61424 pages. > zone(2): 0 pages. > Kernel command line: BOOT_IMAGE=linux ro root=1602 devfs=mount > Initializing CPU#0 > Detected 400.911 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 799.53 BogoMIPS > Memory: 254828k/262080k available (1086k kernel code, 6868k reserved, 397k > data, 712k init, 0k highmem) > Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) > Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) > Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) > Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) > Page-cache hash table entries: 65536 (order: 6, 262144 bytes) > CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 512K > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 > CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 > CPU: Common caps: 0183f9ff 00000000 00000000 00000000 > CPU: Intel Pentium II (Deschutes) stepping 02 > Enabling fast FPU save and restore... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) > mtrr: detected mtrr type: Intel > PCI: PCI BIOS revision 2.10 entry at 0xfb220, last bus=1 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 > Limiting direct PCI/PCI transfers. > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > PnP: PNP BIOS installation structure at 0xc00fbdc0 > PnP: PNP BIOS version 1.0, entry at f0000:bde8, dseg at f0000 > PnP: 13 devices detected total > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14) > Starting kswapd v1.8 > VFS: Diskquotas version dquot_6.5.0 initialized > devfs: v0.115 (20010827) Richard Gooch ([EMAIL PROTECTED]) > devfs: boot_options: 0x1 > Detected PS/2 Mouse Port. > pty: 256 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT > SHARE_IRQ SERIAL_PCI ISAPNP enabled > ttyS00 at 0x03f8 (irq = 4) is a 16550A > ttyS01 at 0x02f8 (irq = 3) is a 16550A > block: queued sectors max/low 169069kB/56356kB, 512 slots per queue > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX4: IDE controller on PCI bus 00 dev 39 > PIIX4: chipset revision 1 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio > hda: SAMSUNG SV0643A, ATA DISK drive > hdb: ATAPI CDROM, ATAPI CD/DVD-ROM drive > hdc: WDC WD300BB-00AUA1, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: 12594960 sectors (6449 MB) w/482KiB Cache, CHS=784/255/63, UDMA(33) > hdc: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=58168/16/63, UDMA(33) > hdb: ATAPI 44X CD-ROM drive, 128kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.12 > ide-floppy driver 0.97 > Partition check: > /dev/ide/host0/bus0/target0/lun0: p1 > /dev/ide/host0/bus1/target0/lun0: [PTBL] [3649/255/63] p1 < p5 p6 p7 > p2 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > ide-floppy driver 0.97 > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 2048 buckets, 16Kbytes > TCP: Hash tables configured (established 16384 bind 16384) > Linux IP multicast router 0.06 plus PIM-SM > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > VFS: Mounted root (ext2 filesystem) readonly. > Mounted devfs on /dev > Freeing unused kernel memory: 712k freed > Real Time Clock Driver v1.10d > Adding Swap: 514040k swap-space (priority -1) > MSDOS FS: IO charset iso8859-1 > MSDOS FS: Using codepage 850 > MSDOS FS: IO charset iso8859-1 > MSDOS FS: Using codepage 850 > reiserfs: checking transaction log (device 16:05) ... > Using r5 hash to sort names > ReiserFS version 3.6.25 > Davicom DM9xxx net driver, version 1.36p1 (May 12, 2001) > PCI: Found IRQ 10 for device 00:12.0 > PCI: Sharing IRQ 10 with 00:07.2 > eth0: Davicom DM9102 at 0xe800, 00:80:ad:7d:2c:95, IRQ 10 > ip_tables: (c)2000 Netfilter core team > ip_conntrack (2047 buckets, 16376 max) > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > usb-uhci.c: $Revision: 1.259 $ time 17:30:17 Sep 23 2001 > usb-uhci.c: High bandwidth mode enabled > PCI: Found IRQ 10 for device 00:07.2 > PCI: Sharing IRQ 10 with 00:12.0 > usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10 > usb-uhci.c: Detected 2 ports > usb.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found > hub.c: 2 ports detected > usb-uhci.c: v1.251:USB Universal Host Controller Interface driver > usb.c: USB disconnect on device 1 > usb.c: USB bus 1 deregistered > usb.c: deregistering driver usbdevfs > usb.c: deregistering driver hub > PnPBIOS: Parport found PNPBIOS PNP0400 at io=0378,0000 irq=7 dma=-1 > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > parport0: cpp_daisy: aa5500ff(38) > parport0: assign_addrs: aa5500ff(38) > parport0: cpp_daisy: aa5500ff(38) > parport0: assign_addrs: aa5500ff(38) > PnPBIOS: Parport found PNPBIOS PNP0400 at io=0378,0000 irq=7 dma=-1 > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > parport0: cpp_daisy: aa5500ff(38) > parport0: assign_addrs: aa5500ff(38) > parport0: cpp_daisy: aa5500ff(38) > parport0: assign_addrs: aa5500ff(38) > devfs: devfs_register(): device already registered: "0" > lp0: using parport0 (interrupt-driven). > es1370: version v0.37 time 17:26:50 Sep 23 2001 > PCI: Found IRQ 12 for device 00:11.0 > es1370: found adapter at io 0xe400 irq 12 > es1370: features: joystick off, line in, mic impedance 0 > CSLIP: code copyright 1989 Regents of the University of California > PPP generic driver version 2.4.1 > auditIN=ppp0 OUT= MAC= SRC=80.16.45.126 DST=200.63.158.246 LEN=60 TOS=0x00 > PREC=0x40 TTL=48 ID=27151 DF PROTO=TCP SPT=1889 DPT=111 WINDOW=32120 > RES=0x00 > SYN URGP=0 > auditIN=ppp0 OUT= MAC= SRC=143.107.105.14 DST=200.63.158.246 LEN=40 > TOS=0x00 > PREC=0x40 TTL=118 ID=1244 PROTO=TCP SPT=22 DPT=22 WINDOW=38560 RES=0x00 SYN > URGP=0 > auditIN=ppp0 OUT= MAC= SRC=213.8.91.120 DST=200.63.158.246 LEN=40 TOS=0x00 > PREC=0x40 TTL=232 ID=38156 PROTO=TCP SPT=21 DPT=21 WINDOW=40 RES=0x00 SYN > URGP=0 > > > > > > [root@localhost root]# cat /etc/modules.conf > > pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start > alias usb-interface usb-uhci > alias eth0 dmfe > above snd-card-ens1370 snd-pcm-oss > alias sound-slot-0 es1370 > [root@localhost root]# > > > > > > > [root@localhost root]# lspcidrake > agpgart : Intel Corporation|440BX/ZX - 82443BX/ZX Host bridge > unknown : Intel Corporation|440BX/ZX - 82443BX/ZX AGP bridge > unknown : Intel Corporation|82371AB PIIX4 ISA > unknown : Intel Corporation|82371AB PIIX4 IDE > usb-uhci : Intel Corporation|82371AB PIIX4 USB > sonypi : Intel Corporation|82371AB PIIX4 ACPI - Bus Master IDE > Controller > snd-card-ens1370: Ensoniq|ES1370 [AudioPCI] > tulip : Davicom|Ethernet 100/10 MBit DM9102 > Card:Intel 740 (generic): Intel Corporation|i740 > > > > hope this gives you an idea of what it might be the problem..... see you > later. > Thanks. > ;o) > > > Damian. > > > _________________________________________________________________ > Send and receive Hotmail on your mobile device: http://mobile.msn.com > > > > ------------------------------------------------------------------------ > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com >
OK try this chkconfig --del alsa in a terminal as root You have an oss driver loaded and Alsa is default and probably overriding your driver. BTW your hard disk drive does not support linux according to the manufacturer and also it does not have the right hardware to support ATA66 or higher though it will usually work there for a while. The problem is in the Error Correcting Code supported. They have special windows drivers to try to preserve data integrity but of course none for linux. Civileme
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
