The only problem I see in your log is that you used 'dummy' mode flag. 
That way cdrecord does a 'test' write, without turning the laser on: no 
actual recording takes place.
If you are using a GUI front-end, check that the 'dummy' flag isn't set.

raffaele

[EMAIL PROTECTED] wrote:
> Hi,
> 
> I can't record a CD-R on my laptop. Any idea before I go to Windows
> to record the CD? I tried with several speeds. 
> 
> Thanks,
> 
>       Marc
> 
> PS: please reply to my address too, since I am not registered to the
> mailing list.
> 
> 
> # cdrecord -v -dummy speed=4 dev=0,0 Mandrake82-cd1-inst.i586.iso
> Cdrecord 1.9 (i586-mandrake-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
> TOC Type: 1 = CD-ROM
> scsidev: '0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.20
> Using libscg version 'schily-0.1'
> atapi: 1
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 1
> Vendor_info    : 'SONY    '
> Identifikation : 'CD-RW  CRX700E  '
> Revision       : '1.4u'
> Device seems to be: Generic mmc CD-RW.
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags   : SWABAUDIO
> Drive buf size : 8377856 = 8181 KB
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  650 MB        
> Total size:     746 MB (73:59.06) = 332930 sectors
> Lout start:     747 MB (74:01/05) = 332930 sectors
> Current Secsize: 2048
> ATIP info from disk:
>   Indicated writing power: 6
>   Is not unrestricted
>   Is not erasable
>   ATIP start of lead in:  -11735 (97:25/40)
>   ATIP start of lead out: 359849 (79:59/74)
> Disk type:    Long strategy type (Cyanine, AZO or similar)
> Manuf. index: 62
> Manufacturer: VIVASTAR AG
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 26919
> Starting to write CD/DVD at speed 4 in dummy mode for single session.
> Last chance to quit, starting dummy write in 1 seconds.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Starting new track at sector: 0
> Track 01:  21 of 650 MB written (fifo 100%).cdrecord: Input/output error. write_g1: 
>scsi sendcmd: retryable error
> CDB:  2A 00 00 00 2A 43 00 00 1F 00
> status: 0x0 (GOOD STATUS)
> 
> write track data: error after 22157312 bytes
> Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
> Writing  time:   29.339s
> Fixating...
> WARNING: Some drives don't like fixation in dummy mode.
> Fixating time:    0.010s
> cdrecord: fifo had 413 puts and 350 gets.
> cdrecord: fifo was 0 times empty and 247 times full, min fill was 92%.
> 
> 
> 
> ------------------------------------------------------------------------
> 
> Want to buy your Pack or Services from MandrakeSoft? 
> Go to http://www.mandrakestore.com


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com

Reply via email to