On Wednesday 18 January 2006 08:05 pm, Bob Read wrote: > My trusty HP 600c finally dies, and I replaced it with a > HP psc 1210v that was in use on a windows box. > > I'm running ML 9.1 on a PIII 750, 512 mb ram. > > Printerdrake recognized and configured the unit, but it > wouldn't print test pages, nor print from a program or CLI. > When I checked printer jobs thru control center, the jobs > sent were lited, and the first job was steadily showing > a slow but steady increase in the pages column -- page 204 > was the last one I looked at. The file was not more than > two or three test pages. > > I have spent hours over the last two days trying to locate the > problem, but no success. > > Printerdrake shows: "HP psc 1210 multi-function device on > USB(Default,Descr: HP psc 1200 Driver: hpijs). > > Oddly, The Scan function works fine. That was wher I had > expected trouble, but in scans to any program I have tried. > > (Put back on the windows box it prints OK.) > > Any ideas as to what might be wrong? > > Much thanks in advance. have you uploaded the ppd file from http://www.linuxprinting.org/ and do you have http://www.linuxprinting.org/show_printer.cgi?recnum=HP-PSC_1210 hpijs installed ?
> > Bob ____________________________________________________ Want to buy your Pack or Services from Mandriva? Go to http://store.mandriva.com Join the Club : http://www.mandrivaclub.com ____________________________________________________
