Hope this helps
Cheers
[Ani_Adarsh]
I've noted down a few things in ur file now its up to u to play
around with it and set it ok ....
PS: Did u know a monitor had these kinds of specs ??? I didn't until
i setup my linux ... ;-)
> # XFree86 4.0 configuration generated by Xconfigurator
>
>
> Section "ServerLayout"
> Identifier "XFree86 Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> # By default, Red Hat Linux 6.0 and later use xfs
> Section "Files"
> # FontPath "unix/:7100"
> FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
> FontPath "/usr/X11R6/lib/X11/fonts/misc"
> FontPath "/usr/X11R6/lib/X11/fonts/Type1"
> FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
> FontPath "/usr/share/fonts/default/Type1"
> FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
> FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
> EndSection
>
> # Module loading section
> Section "Module"
> Load "dbe" # Double-buffering
> Load "GLcore" # OpenGL support
> Load "dri" # Direct rendering infrastructure
> Load "glx" # OpenGL X protocol interface
> Load "extmod" # Misc. required extensions
> Load "v4l" # Video4Linux
> # Load "pex5" # PHIGS for X 3D environment (obsolete)
> # Load "record" # X event recorder
> # Load "xie" # X Image Extension (obsolete)
> # You only need the following two modules if you do not use xfs.
> Load "freetype" # TrueType font handler
> Load "type1" # Adobe Type 1 font handler
> Load "speedo" # Adobe Type 1 font handler
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "keyboard"
> Option "XkbLayout" "us"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Device" "/dev/mouse"
> Option "Protocol" "PS/2"
> Option "Emulate3Buttons" "off"
> Option "ZAxisMapping" "4 5"
> EndSection
>
> Section "Monitor"
> Identifier "Generic High Frequency SVGA, 1024x768 @ 70 Hz"
> VendorName "Unknown"
> ModelName "Unknown"
> # HorizSync 31.5-57.0
> HorizSync 30-95 # [Ani_Adarsh] play around with these values find out
> HorizSync range and VertRefresh ranges for ur laptop and fill in right
> values ... this might be a problem ....
> # VertRefresh 50-70
> VertRefresh 50-160
> # Option "dpms"
> EndSection
>
> Section "Device"
> Identifier "SiS 630"
> Driver "sis"
> BoardName "Unknown"
> EndSection
>
> Section "Device"
> Identifier "Linux Frame Buffer"
> Driver "fbdev"
> BoardName "Unknown"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "SiS 630"
> Monitor "Generic High Frequency SVGA, 1024x768 @ 70 Hz"
#[Ani_Adarsh] Added modes and made default depth to 16 ... try all
possible combinations if one doesn't work ...
# DefaultDepth 8
DefaultDepth 16
> Subsection "Display"
> Depth 16
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> Section "DRI"
> Mode 0666
> EndSection
>
>
**************************************************************************
This email (including any attachments) is intended for the sole use of the
intended recipient/s and may contain material that is CONFIDENTIAL AND
PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or
distribution or forwarding of any or all of the contents in this message is
STRICTLY PROHIBITED. If you are not the intended recipient, please contact
the sender by email and delete all copies; your cooperation in this regard
is appreciated.
**************************************************************************
_______________________________________________
Newbie mailing list
[EMAIL PROTECTED]
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
