You should use (in the expert mode of printerdrake) "GhostScript + gimp-print", "GhostScript + gimp-print-ijs", "GhostScript + pcl3" for your printer, not "CUPS + gimp-print". A new GhostScript update will follow soon.
Till
Joe English wrote:
Unfortunately, your PPD file and your error_log output do not belong to each other.
Oops! Yes, sorry, my mistake. The error_log excerpt must have been from when I was trying a different driver --
I tried several before I found the one that worked --
the error "Unknown device: cups" showed up for most of them,
but *not* with the "GhostScript + hpijs-rss" driver.
That one gave a different error, see below...
The "*cupsFilter" line of the PPD file says that CUPS should use "cupsomatic" as the last filter in the filter chain. This would mean that "cupsomatic" must appear in the error_log, but your error_log shows the filter chain
texttops -> pstops -> pstoraster -> rastertoprinter
This is the filter chain which you would get when you have installed a printer with the driver choice "CUPS + GIMP-Print", but, according to your PPD file, you have chosen a driver "GhostScript + hpijs-rss".
Can you please restart the CUPS daemon (to assure that all is in sync) and then send a job using your current configuration and send me the error_log an the PPD file of the current configuration?
Sure; see attached.
It looks like the relevant error is coming from 'foomatic-gswrapper': "Unable to set device=0, err=16":
| D [04/Nov/2002:22:06:04 -0800] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=HP DeskJet 4' '-dDEVICEWIDTHPOINTS=612' '-dDEVICEHEIGHTPOINTS=792' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=/dev/fd/3' '/dev/fd/0' 3>&1 1>&2
| D [04/Nov/2002:22:06:04 -0800] unable to set device=0, err=16
| D [04/Nov/2002:22:06:04 -0800] **** Unable to open the initial device, quitting.
| D [04/Nov/2002:22:06:04 -0800] Couldn't exec foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="HP DeskJet 4" -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- - at /usr/lib/cups/filter/cupsomatic line 1097.
I have *no* idea what "err=16" or "device=0" means, but hopefully one of you guys will be able to figure it out :-)
--Joe English
[EMAIL PROTECTED]
------------------------------------------------------------------------
# Printer configuration file for CUPS v1.1.16
# Written by cupsd on Tue 05 Nov 2002 05:57:56 AM GMT
<DefaultPrinter Printer>
Info HP HP DeskJet 400
DeviceURI parallel:/dev/lp0
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
------------------------------------------------------------------------
*PPD-Adobe: "4.3"
*%
* 0.000000or information on using this, and to obtain the required backend
*cript, consult http://www.linuxprinting.org/ppd-doc.html
*%
*% PPD-O-MATIC generated this PPD file. It is for use with all programs *% and environments which use PPD files for dealing with printer capabilty
* 0nformation. The printer must be configured with a Foomatic backend
* 0.000000ilter script. This file and the backend filter script work together to
*upport PPD-controlled printer driver option access with arbitrary free *oftware printer drivers and printing spoolers.
*%
*% You may save this file as 'HP-DeskJet_400-hpijs-rss.ppd'
*%
*%
*FormatVersion: "4.3"
*FileVersion: "1.1"
*LanguageVersion: English *LanguageEncoding: ISOLatin1
*PCFileName: "HPIJS-RS.PPD"
*Manufacturer: "Hewlett-Packard"
*Product: "HP DeskJet 400"
*cupsVersion: 1.0
*cupsManualCopies: True
*cupsModelNumber: 2
*cupsFilter: "application/vnd.cups-postscript 0 cupsomatic"
*ModelName: "HP DeskJet 400, Foomatic + hpijs-rss"
*NickName: "HP DeskJet 400, Foomatic + hpijs-rss"
*ShortNickName: "HP DeskJet 400"
*PSVersion: "(3010.000) 550"
*PSVersion: "(3010.000) 651"
*PSVersion: "(3010.000) 652"
*PSVersion: "(3010.000) 653"
*PSVersion: "(3010.000) 704"
*PSVersion: "(3010.000) 705"
*LanguageLevel: "3"
*ColorDevice: True
*DefaultColorSpace: RGB
*FileSystem: False
*Throughput: "1"
*LandscapeOrientation: Plus90
*TTRasterizer: Type42
*VariablePaperSize: False
*OpenUI *PageSize/Page Size: PickOne
*OrderDependency: 105 AnySetup *PageSize
*DefaultPageSize: Letter
*PageSize Letter/Letter: "% FoomaticOpt: PageSize=Letter"
*PageSize A4/A4: "% FoomaticOpt: PageSize=A4"
*PageSize A5/A5: "% FoomaticOpt: PageSize=A5"
*PageSize A6/A6: "% FoomaticOpt: PageSize=A6"
*PageSize B5JIS/B5 (JIS): "% FoomaticOpt: PageSize=B5JIS"
*PageSize Executive/Executive: "% FoomaticOpt: PageSize=Executive"
*PageSize FLSA/American Foolscap: "% FoomaticOpt: PageSize=FLSA"
*PageSize Hagaki/Hagaki: "% FoomaticOpt: PageSize=Hagaki"
*PageSize Legal/Legal: "% FoomaticOpt: PageSize=Legal"
*PageSize Oufuku/Oufuku-Hagaki: "% FoomaticOpt: PageSize=Oufuku"
*PageSize Photo/Photo: "% FoomaticOpt: PageSize=Photo"
*CloseUI: *PageSize
*OpenUI *PageRegion: PickOne
*OrderDependency: 105 AnySetup *PageRegion
*DefaultPageRegion: Letter
*PageRegion Letter/Letter: "% FoomaticOpt: PageSize=Letter"
*PageRegion A4/A4: "% FoomaticOpt: PageSize=A4"
*PageRegion A5/A5: "% FoomaticOpt: PageSize=A5"
*PageRegion A6/A6: "% FoomaticOpt: PageSize=A6"
*PageRegion B5JIS/B5 (JIS): "% FoomaticOpt: PageSize=B5JIS"
*PageRegion Executive/Executive: "% FoomaticOpt: PageSize=Executive"
*PageRegion FLSA/American Foolscap: "% FoomaticOpt: PageSize=FLSA"
*PageRegion Hagaki/Hagaki: "% FoomaticOpt: PageSize=Hagaki"
*PageRegion Legal/Legal: "% FoomaticOpt: PageSize=Legal"
*PageRegion Oufuku/Oufuku-Hagaki: "% FoomaticOpt: PageSize=Oufuku"
*PageRegion Photo/Photo: "% FoomaticOpt: PageSize=Photo"
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter/Letter: "0 0 612 792"
*ImageableArea A4/A4: "0 0 595 842"
*ImageableArea A5/A5: "0 0 420 595"
*ImageableArea A6/A6: "0 0 297 420"
*ImageableArea B5JIS/B5 (JIS): "0 0 516 729"
*ImageableArea Executive/Executive: "0 0 522 756"
*ImageableArea FLSA/American Foolscap: "0 0 612 936"
*ImageableArea Hagaki/Hagaki: "0 0 283 420"
*ImageableArea Legal/Legal: "0 0 612 1008"
*ImageableArea Oufuku/Oufuku-Hagaki: "0 0 420 567"
*ImageableArea Photo/Photo: "0 0 288 432"
*DefaultPaperDimension: Letter
*PaperDimension Letter/Letter: "612 792"
*PaperDimension A4/A4: "595 842"
*PaperDimension A5/A5: "420 595"
*PaperDimension A6/A6: "297 420"
*PaperDimension B5JIS/B5 (JIS): "516 729"
*PaperDimension Executive/Executive: "522 756"
*PaperDimension FLSA/American Foolscap: "612 936"
*PaperDimension Hagaki/Hagaki: "283 420"
*PaperDimension Legal/Legal: "612 1008"
*PaperDimension Oufuku/Oufuku-Hagaki: "420 567"
*PaperDimension Photo/Photo: "288 432"
*OpenUI *Resolution/Resolution, Quality, Ink Type, Media Type: PickOne
*OrderDependency: 100 AnySetup *Resolution
*DefaultResolution: 300ColorCMY
*Resolution 300ColorCMY/300 dpi, Color, Color Cartr.: "% FoomaticOpt: Resolution=300ColorCMY"
*Resolution 300DraftColorCMY/300 dpi, Draft, Color, Color Cartr.: "% FoomaticOpt: Resolution=300DraftColorCMY"
*Resolution 300DraftGrayscaleK/300 dpi, Draft, Grayscale, Black Cartr.: "% FoomaticOpt: Resolution=300DraftGrayscaleK"
*Resolution 300GrayscaleK/300 dpi, Grayscale, Black Cartr.: "% FoomaticOpt: Resolution=300GrayscaleK"
*CloseUI: *Resolution
* 0eneric boilerplate PPD stuff as standard PostScript fonts and so on
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.006S)" Standard ROM
*Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM
*Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM
*Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM
*Font Bookman-Demi: Standard "(001.004S)" Standard ROM
*Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM
*Font Bookman-Light: Standard "(001.004S)" Standard ROM
*Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM
*Font Courier: Standard "(002.004S)" Standard ROM
*Font Courier-Bold: Standard "(002.004S)" Standard ROM
*Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM
*Font Courier-Oblique: Standard "(002.004S)" Standard ROM
*Font Helvetica: Standard "(001.006S)" Standard ROM
*Font Helvetica-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM
*Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM
*Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM
*Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM
*Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM
*Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM
*Font Palatino-Bold: Standard "(001.005S)" Standard ROM
*Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM
*Font Palatino-Italic: Standard "(001.005S)" Standard ROM
*Font Palatino-Roman: Standard "(001.005S)" Standard ROM
*Font Symbol: Special "(001.007S)" Special ROM
*Font Times-Bold: Standard "(001.007S)" Standard ROM
*Font Times-BoldItalic: Standard "(001.009S)" Standard ROM
*Font Times-Italic: Standard "(001.007S)" Standard ROM
*Font Times-Roman: Standard "(001.007S)" Standard ROM
*Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM
*Font ZapfDingbats: Special "(001.004S)" Standard ROM
*% What follows is a dumped representation of the internal Perl data
*tructure representing one entry in the Linux Printing Database.
*% This can be used by frontends to give advanced features which are
*0eyond the possibilities which can be defined by Adobe-compliant PPDs.
*% The lines are comment lines, so that programs which require *% Adobe-compliant PPD files can handle this file. They simply ignore
*% this additional information.
*%
*% COMDATA #$VAR1 = {
*% COMDATA # 'pnp_cmd' => 'PCL,C32',
*% COMDATA # 'model' => 'DeskJet 400',
*% COMDATA # 'maxspot' => 'B',
*% COMDATA # 'pnp_mdl' => 'HP DeskJet 400',
*% COMDATA # 'url' => 'http://www.linuxprinting.org/download/printing/hpijs/',
*% COMDATA # 'id' => '63040',
*% COMDATA # 'compiled-at' => 'Mon Nov 4 21:57:55 2002',
*% COMDATA # 'snmp_mfg' => undef,
*% COMDATA # 'cmd' => 'gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs%A%B%C -dIjsUseOutputFD%Z -sOutputFile=- -',
*% COMDATA # 'pjl' => undef,
*% COMDATA # 'type' => 'F',
*% COMDATA # 'par_cmd' => 'PCL,C32',
*% COMDATA # 'pcmodel' => undef,
*% COMDATA # 'usb_cmd' => undef,
*% COMDATA # 'par_des' => 'HP DeskJet 400 Printer',
*% COMDATA # 'args' => [
*% COMDATA # {
*% COMDATA # 'proto' => '',
*% COMDATA # 'style' => 'C',
*% COMDATA # 'name' => 'PageSize',
*% COMDATA # 'default' => 'Letter',
*% COMDATA # 'vals' => [
*% COMDATA # {
*% COMDATA # 'comment' => 'Letter',
*% COMDATA # 'value' => 'Letter',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-Letter'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'A4',
*% COMDATA # 'value' => 'A4',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-A4'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'A5',
*% COMDATA # 'value' => 'A5',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=420 -dDEVICEHEIGHTPOINTS=595',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-A5'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'A6',
*% COMDATA # 'value' => 'A6',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=297 -dDEVICEHEIGHTPOINTS=420',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-A6'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'B5 (JIS)',
*% COMDATA # 'value' => 'B5JIS',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=516 -dDEVICEHEIGHTPOINTS=729',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-B5JIS'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'Executive',
*% COMDATA # 'value' => 'Executive',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=522 -dDEVICEHEIGHTPOINTS=756',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-Executive'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'American Foolscap',
*% COMDATA # 'value' => 'FLSA',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=936',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-FLSA'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'Hagaki',
*% COMDATA # 'value' => 'Hagaki',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=283 -dDEVICEHEIGHTPOINTS=420',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-Hagaki'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'Legal',
*% COMDATA # 'value' => 'Legal',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=1008',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-Legal'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'Oufuku-Hagaki',
*% COMDATA # 'value' => 'Oufuku',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=420 -dDEVICEHEIGHTPOINTS=567',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-Oufuku'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => 'Photo',
*% COMDATA # 'value' => 'Photo',
*% COMDATA # 'driverval' => ' -dDEVICEWIDTHPOINTS=288 -dDEVICEHEIGHTPOINTS=432',
*% COMDATA # 'idx' => 'ev/hpijs-rss-PageSize-Photo'
*% COMDATA # }
*% COMDATA # ],
*% COMDATA # 'spot' => 'A',
*% COMDATA # 'comment' => 'Page Size',
*% COMDATA # 'order' => '105',
*% COMDATA # 'vals_byname' => {
*% COMDATA # 'A6' => {},
*% COMDATA # 'Letter' => {},
*% COMDATA # 'A5' => {},
*% COMDATA # 'Oufuku' => {},
*% COMDATA # 'B5JIS' => {},
*% COMDATA # 'Photo' => {},
*% COMDATA # 'A4' => {},
*% COMDATA # 'Executive' => {},
*% COMDATA # 'Hagaki' => {},
*% COMDATA # 'FLSA' => {},
*% COMDATA # 'Legal' => {}
*% COMDATA # },
*% COMDATA # 'idx' => 'opt/hpijs-rss-PageSize',
*% COMDATA # 'type' => 'enum'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'proto' => ' -r',
*% COMDATA # 'style' => 'C',
*% COMDATA # 'name' => 'Resolution',
*% COMDATA # 'default' => '300ColorCMY',
*% COMDATA # 'vals' => [
*% COMDATA # {
*% COMDATA # 'comment' => '300 dpi, Color, Color Cartr.',
*% COMDATA # 'value' => '300ColorCMY',
*% COMDATA # 'driverval' => '300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1',
*% COMDATA # 'idx' => 'ev/hpijs-rss-Resolution-300ColorCMY'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => '300 dpi, Draft, Color, Color Cartr.',
*% COMDATA # 'value' => '300DraftColorCMY',
*% COMDATA # 'driverval' => '300 -sIjsParams=Quality:Quality=1,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1',
*% COMDATA # 'idx' => 'ev/hpijs-rss-Resolution-300DraftColorCMY'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => '300 dpi, Draft, Grayscale, Black Cartr.',
*% COMDATA # 'value' => '300DraftGrayscaleK',
*% COMDATA # 'driverval' => '300 -sIjsParams=Quality:Quality=1,Quality:ColorMode=0,Quality:MediaType=0,Quality:PenSet=0',
*% COMDATA # 'idx' => 'ev/hpijs-rss-Resolution-300DraftGrayscaleK'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'comment' => '300 dpi, Grayscale, Black Cartr.',
*% COMDATA # 'value' => '300GrayscaleK',
*% COMDATA # 'driverval' => '300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=0,Quality:MediaType=0,Quality:PenSet=0',
*% COMDATA # 'idx' => 'ev/hpijs-rss-Resolution-300GrayscaleK'
*% COMDATA # }
*% COMDATA # ],
*% COMDATA # 'spot' => 'B',
*% COMDATA # 'comment' => 'Resolution, Quality, Ink Type, Media Type',
*% COMDATA # 'order' => '100',
*% COMDATA # 'vals_byname' => {
*% COMDATA # '300GrayscaleK' => {},
*% COMDATA # '300ColorCMY' => {},
*% COMDATA # '300DraftGrayscaleK' => {},
*% COMDATA # '300DraftColorCMY' => {}
*% COMDATA # },
*% COMDATA # 'idx' => 'opt/hpijs-rss-Resolution',
*% COMDATA # 'type' => 'enum'
*% COMDATA # },
*% COMDATA # {
*% COMDATA # 'proto' => ' ',
*% COMDATA # 'style' => 'C',
*% COMDATA # 'name' => 'Model',
*% COMDATA # 'default' => 'HP-DeskJet_400C',
*% COMDATA # 'vals' => [
*% COMDATA # {
*% COMDATA # 'comment' => 'HP DeskJet 400C',
*% COMDATA # 'value' => 'HP-DeskJet_400C',
*% COMDATA # 'driverval' => '-sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="HP DeskJet 4"',
*% COMDATA # 'idx' => 'ev/hpijs-rss-Model-63040'
*% COMDATA # }
*% COMDATA # ],
*% COMDATA # 'spot' => 'A',
*% COMDATA # 'required' => 1,
*% COMDATA # 'comment' => 'Model',
*% COMDATA # 'order' => '100',
*% COMDATA # 'vals_byname' => {
*% COMDATA # 'HP-DeskJet_400C' => {}
*% COMDATA # },
*% COMDATA # 'idx' => 'opt/hpijs-rss-Model',
*% COMDATA # 'type' => 'enum'
*% COMDATA # }
*% COMDATA # ],
*% COMDATA # 'compiled-by' => '[EMAIL PROTECTED]',
*% COMDATA # 'par_mdl' => 'HP DeskJet 400',
*% COMDATA # 'color' => 1,
*% COMDATA # 'timestamp' => 1036475875,
*% COMDATA # 'snmp_des' => undef,
*% COMDATA # 'pnp_des' => 'HP DeskJet 400 Printer',
*% COMDATA # 'snmp_cmd' => undef,
*% COMDATA # 'usb_mfg' => undef,
*% COMDATA # 'make' => 'HP',
*% COMDATA # 'usb_des' => undef,
*% COMDATA # 'snmp_mdl' => undef,
*% COMDATA # 'drivernopjl' => 1,
*% COMDATA # 'args_byname' => {
*% COMDATA # 'PageSize' => {},
*% COMDATA # 'Resolution' => {},
*% COMDATA # 'Model' => {}
*% COMDATA # },
*% COMDATA # 'ascii' => 1,
*% COMDATA # 'pcdriver' => undef,
*% COMDATA # 'comment' => '
*% COMDATA #
*% COMDATA # This driver is HP\'s
*% COMDATA # <a href="show_driver.cgi?driver=hpijs">HPIJS</a>
*% COMDATA # printer driver with added patches from Matthias Bunte adapted to
*% COMDATA # HPIJS 1.2.x by Richard Spencer-Smith. It improves HPIJS in the following
*% COMDATA # points:<P>
*% COMDATA #
*% COMDATA # <ul>
*% COMDATA #
*% COMDATA # <li>The color modes use the black cartridge for black text when
*% COMDATA # printing in color (for DeskJet 6xx, 8xx, and 9xx printers).<P>
*% COMDATA #
*% COMDATA # <li>Added Presentation Mode (600x600dpi, plain paper) for
*% COMDATA # DeskJet 9xx series.<P>
*% COMDATA #
*% COMDATA # <li>Added HiRes Photo Mode (1200x1200dpi, photo paper) for
*% COMDATA # DeskJet 9xx series.<P>
*% COMDATA #
*% COMDATA # </ul>
*% COMDATA #
*% COMDATA # With these improvements the driver gives the same output quality as
*% COMDATA # HP\'s Windoes drivers for most printers. Especially the old
*% COMDATA # DeskJet 9xx series (2000C, DeskJet 916C, 92xC, 93xC, 94xC, 95xC,
*% COMDATA # 97xC, 1220C, OfficeJet G, K, V series, PSC 750, 950, PhotoSmart
*% COMDATA # P1x00) qualifies for being "Perfectly" working now (as
*% COMDATA # long as they do not have a not supported fax facility). There are no
*% COMDATA # benefits for old black-and-white inkjets, lasers, and the new
*% COMDATA # DeskJet 9xx series (DeskJet 450, 96xC, 98xC 99xC, 3820, 5xxx, 6xxx,
*% COMDATA # OfficeJet D series, PSC 2xxx, PhotoSmart P1xx, P2xx, 1x15, 1x18,
*% COMDATA # 7xxx. Business Inkjet series, CP 1160, 1700), but they work as
*% COMDATA # before with the patched driver, so that in distros only the patched
*% COMDATA # one needs to be provided.<P>
*% COMDATA #
*% COMDATA # All the other capabilities of this driver are the same as of the
*% COMDATA # original <a
*% COMDATA # href="show_driver.cgi?driver=hpijs">HPIJS</a>.<P>
*% COMDATA #
*% COMDATA # The driver execution data currently available on this site is for
*% COMDATA # version 1.2.1 and 1.2.2 (or newer) of the patched HPIJS and IJS 0.33
*% COMDATA # (available in GNU GhostScript 6.53 and APFL GhostScript 7.04). It
*% COMDATA # does not work with older versions of HPIJS and IJS or the unpatched
*% COMDATA # HPIJS.<P>
*% COMDATA #
*% COMDATA # ',
*% COMDATA # 'par_mfg' => 'Hewlett-Packard',
*% COMDATA # 'pnp_mfg' => 'Hewlett-Packard',
*% COMDATA # 'usb_mdl' => undef,
*% COMDATA # 'driver' => 'hpijs-rss'
*% COMDATA #};
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'A6'} = $VAR1->{'args'}[0]{'vals'}[3];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'Letter'} = $VAR1->{'args'}[0]{'vals'}[0];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'A5'} = $VAR1->{'args'}[0]{'vals'}[2];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'Oufuku'} = $VAR1->{'args'}[0]{'vals'}[9];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'B5JIS'} = $VAR1->{'args'}[0]{'vals'}[4];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'Photo'} = $VAR1->{'args'}[0]{'vals'}[10];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'A4'} = $VAR1->{'args'}[0]{'vals'}[1];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'Executive'} = $VAR1->{'args'}[0]{'vals'}[5];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'Hagaki'} = $VAR1->{'args'}[0]{'vals'}[7];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'FLSA'} = $VAR1->{'args'}[0]{'vals'}[6];
*% COMDATA #$VAR1->{'args'}[0]{'vals_byname'}{'Legal'} = $VAR1->{'args'}[0]{'vals'}[8];
*% COMDATA #$VAR1->{'args'}[1]{'vals_byname'}{'300GrayscaleK'} = $VAR1->{'args'}[1]{'vals'}[3];
*% COMDATA #$VAR1->{'args'}[1]{'vals_byname'}{'300ColorCMY'} = $VAR1->{'args'}[1]{'vals'}[0];
*% COMDATA #$VAR1->{'args'}[1]{'vals_byname'}{'300DraftGrayscaleK'} = $VAR1->{'args'}[1]{'vals'}[2];
*% COMDATA #$VAR1->{'args'}[1]{'vals_byname'}{'300DraftColorCMY'} = $VAR1->{'args'}[1]{'vals'}[1];
*% COMDATA #$VAR1->{'args'}[2]{'vals_byname'}{'HP-DeskJet_400C'} = $VAR1->{'args'}[2]{'vals'}[0];
*% COMDATA #$VAR1->{'args_byname'}{'PageSize'} = $VAR1->{'args'}[0];
*% COMDATA #$VAR1->{'args_byname'}{'Resolution'} = $VAR1->{'args'}[1];
*% COMDATA #$VAR1->{'args_byname'}{'Model'} = $VAR1->{'args'}[2];
------------------------------------------------------------------------
I [04/Nov/2002:22:04:53 -0800] Listening to 0:631
D [04/Nov/2002:22:04:53 -0800] AddLocation: added location 'CUPS_INTERNAL_BROWSE_ACL'
D [04/Nov/2002:22:04:53 -0800] DenyIP: CUPS_INTERNAL_BROWSE_ACL deny 00000000/00000000
D [04/Nov/2002:22:04:53 -0800] AllowIP: CUPS_INTERNAL_BROWSE_ACL allow 7f000001/ffffffff
D [04/Nov/2002:22:04:53 -0800] AllowHost: CUPS_INTERNAL_BROWSE_ACL allow @LOCAL
D [04/Nov/2002:22:04:53 -0800] AddLocation: added location '/'
D [04/Nov/2002:22:04:53 -0800] DenyIP: / deny 00000000/00000000
D [04/Nov/2002:22:04:53 -0800] AllowIP: / allow 7f000001/ffffffff
D [04/Nov/2002:22:04:53 -0800] AllowHost: / allow @LOCAL
D [04/Nov/2002:22:04:53 -0800] AddLocation: added location '/admin'
D [04/Nov/2002:22:04:53 -0800] DenyIP: /admin deny 00000000/00000000
D [04/Nov/2002:22:04:53 -0800] AllowIP: /admin allow 7f000001/ffffffff
D [04/Nov/2002:22:04:53 -0800] ReadConfiguration() ConfigurationFile="/etc/cups/cupsd.conf"
I [04/Nov/2002:22:04:53 -0800] Configured for up to 100 clients.
I [04/Nov/2002:22:04:53 -0800] LoadPPDs: Read "/etc/cups/ppds.dat", 730 PPDs...
I [04/Nov/2002:22:04:53 -0800] LoadPPDs: No new or changed PPDs...
D [04/Nov/2002:22:04:53 -0800] LoadDevices: Added device "parallel:/dev/lp0"...
D [04/Nov/2002:22:04:53 -0800] LoadDevices: Added device "http"...
D [04/Nov/2002:22:04:53 -0800] LoadDevices: Added device "ipp"...
D [04/Nov/2002:22:04:53 -0800] LoadDevices: Added device "lpd"...
D [04/Nov/2002:22:04:53 -0800] LoadDevices: Added device "socket"...
D [04/Nov/2002:22:04:53 -0800] LoadDevices: Added device "canon:/dev/lp0"...
D [04/Nov/2002:22:04:53 -0800] LoadDevices: Added device "epson:/dev/lp0"...
D [04/Nov/2002:22:04:53 -0800] LoadDevices: Added device "smb"...
D [04/Nov/2002:22:04:53 -0800] StartListening: NumListeners=1
D [04/Nov/2002:22:04:53 -0800] StartListening: address=00000000 port=631
D [04/Nov/2002:22:04:53 -0800] ResumeListening: setting input bits...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Scanning /var/spool/cups...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 22...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 23...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 24...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 25...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 27...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 26...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 28...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 29...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 30...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 31...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 32...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 33...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 34...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 35...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 36...
D [04/Nov/2002:22:04:53 -0800] LoadAllJobs: Loading attributes for job 37...
D [04/Nov/2002:22:05:41 -0800] AcceptClient() 3 from localhost:631.
D [04/Nov/2002:22:05:41 -0800] AcceptClient() 4 from localhost:631.
D [04/Nov/2002:22:05:41 -0800] ReadClient() 4 POST / HTTP/1.1
D [04/Nov/2002:22:05:41 -0800] CloseClient() 4
D [04/Nov/2002:22:05:41 -0800] AcceptClient() 4 from localhost:631.
D [04/Nov/2002:22:05:41 -0800] ReadClient() 4 POST / HTTP/1.1
D [04/Nov/2002:22:05:41 -0800] CloseClient() 4
D [04/Nov/2002:22:05:41 -0800] AcceptClient() 4 from localhost:631.
D [04/Nov/2002:22:05:41 -0800] ReadClient() 4 POST / HTTP/1.1
D [04/Nov/2002:22:05:41 -0800] ReadClient() 3 POST / HTTP/1.1
D [04/Nov/2002:22:05:41 -0800] ReadClient() 3 POST / HTTP/1.1
D [04/Nov/2002:22:05:41 -0800] CloseClient() 3
D [04/Nov/2002:22:05:41 -0800] CloseClient() 4
D [04/Nov/2002:22:06:04 -0800] AcceptClient() 3 from localhost:631.
D [04/Nov/2002:22:06:04 -0800] ReadClient() 3 POST / HTTP/1.1
D [04/Nov/2002:22:06:04 -0800] CloseClient() 3
D [04/Nov/2002:22:06:04 -0800] AcceptClient() 3 from localhost:631.
D [04/Nov/2002:22:06:04 -0800] ReadClient() 3 POST / HTTP/1.1
D [04/Nov/2002:22:06:04 -0800] CloseClient() 3
D [04/Nov/2002:22:06:04 -0800] AcceptClient() 3 from localhost:631.
D [04/Nov/2002:22:06:04 -0800] ReadClient() 3 POST / HTTP/1.1
D [04/Nov/2002:22:06:04 -0800] ReadClient() 3 POST /printers/Printer HTTP/1.1
D [04/Nov/2002:22:06:04 -0800] print_job: auto-typing file...
D [04/Nov/2002:22:06:04 -0800] print_job: request file type is text/plain.
D [04/Nov/2002:22:06:04 -0800] check_quotas: requesting-user-name = 'root'
D [04/Nov/2002:22:06:04 -0800] print_job: requesting-user-name = 'root'
I [04/Nov/2002:22:06:04 -0800] Job 38 queued on 'Printer' by 'root'.
D [04/Nov/2002:22:06:04 -0800] Job 38 hold_until = 0
D [04/Nov/2002:22:06:04 -0800] StartJob(38, 0x808e500)
D [04/Nov/2002:22:06:04 -0800] StartJob() id = 38, file = 0/1
D [04/Nov/2002:22:06:04 -0800] job-sheets=none,none
D [04/Nov/2002:22:06:04 -0800] banner_page = 0
D [04/Nov/2002:22:06:04 -0800] StartJob: argv = "Printer","38","root","printers.conf","1","page-top=36 page-bottom=36 page-left=36 page-right=36 cpi=12 lpi=7 wrap scaling=100","/var/spool/cups/d00038-001"
D [04/Nov/2002:22:06:04 -0800] StartJob: envp = "PATH=/usr/lib/cups/filter:/bin:/usr/bin","SOFTWARE=CUPS/1.1","USER=root","CHARSET=iso-8859-1","LANG=en_US","TZ=GMT","PPD=/etc/cups/ppd/Printer.ppd","CUPS_SERVERROOT=/etc/cups","RIP_MAX_CACHE=8m","TMPDIR=/var/spool/cups/tmp","CONTENT_TYPE=text/plain","DEVICE_URI=parallel:/dev/lp0","PRINTER=Printer","CUPS_DATADIR=/usr/share/cups","CUPS_FONTPATH=/usr/share/cups/fonts","","",""
D [04/Nov/2002:22:06:04 -0800] StartJob: statusfds = 4, 6
D [04/Nov/2002:22:06:04 -0800] StartJob: filterfds[1] = 7, -1
D [04/Nov/2002:22:06:04 -0800] StartJob: filter = "/usr/lib/cups/filter/texttops"
D [04/Nov/2002:22:06:04 -0800] StartJob: filterfds[0] = 8, 9
D [04/Nov/2002:22:06:04 -0800] start_process("/usr/lib/cups/filter/texttops", 0xbfff1640, 0xbffecaf0, 7, 9, 6)
I [04/Nov/2002:22:06:04 -0800] Started filter /usr/lib/cups/filter/texttops (PID 3923) for job 38.
D [04/Nov/2002:22:06:04 -0800] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [04/Nov/2002:22:06:04 -0800] StartJob: filterfds[1] = 7, 10
D [04/Nov/2002:22:06:04 -0800] start_process("/usr/lib/cups/filter/pstops", 0xbfff1640, 0xbffecaf0, 8, 10, 6)
I [04/Nov/2002:22:06:04 -0800] Started filter /usr/lib/cups/filter/pstops (PID 3924) for job 38.
D [04/Nov/2002:22:06:04 -0800] StartJob: filter = "/usr/lib/cups/filter/cupsomatic"
D [04/Nov/2002:22:06:04 -0800] StartJob: filterfds[0] = 8, 9
D [04/Nov/2002:22:06:04 -0800] start_process("/usr/lib/cups/filter/cupsomatic", 0xbfff1640, 0xbffecaf0, 7, 9, 6)
I [04/Nov/2002:22:06:04 -0800] Started filter /usr/lib/cups/filter/cupsomatic (PID 3925) for job 38.
D [04/Nov/2002:22:06:04 -0800] StartJob: backend = "/usr/lib/cups/backend/parallel"
D [04/Nov/2002:22:06:04 -0800] StartJob: filterfds[1] = -1, 7
D [04/Nov/2002:22:06:04 -0800] start_process("/usr/lib/cups/backend/parallel", 0xbfff1640, 0xbffecaf0, 8, 7, 6)
I [04/Nov/2002:22:06:04 -0800] Started backend /usr/lib/cups/backend/parallel (PID 3926) for job 38.
D [04/Nov/2002:22:06:04 -0800] Page = 612x792; 0,0 to 612,792
D [04/Nov/2002:22:06:04 -0800] ppd->num_fonts = 35
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[0] = AvantGarde-Book
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[1] = AvantGarde-BookOblique
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[2] = AvantGarde-Demi
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[3] = AvantGarde-DemiOblique
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[4] = Bookman-Demi
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[5] = Bookman-DemiItalic
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[6] = Bookman-Light
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[7] = Bookman-LightItalic
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[8] = Courier
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[9] = Courier-Bold
D [04/Nov/2002:22:06:04 -0800] ppd->num_fonts = 35
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[0] = AvantGarde-Book
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[1] = AvantGarde-BookOblique
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[2] = AvantGarde-Demi
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[3] = AvantGarde-DemiOblique
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[4] = Bookman-Demi
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[5] = Bookman-DemiItalic
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[6] = Bookman-Light
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[7] = Bookman-LightItalic
D [04/Nov/2002:22:06:04 -0800] ppd->fonts[8] = Courier
D [04/Nov/2002:22:06:04 -0800] Page = 612x792; 0,0 to 612,792
D [04/Nov/2002:22:06:04 -0800] 0 %BoundingBox: 36 36 576 756
D [04/Nov/2002:22:06:04 -0800] 0 %Creator: texttops/CUPS v1.1.16
D [04/Nov/2002:22:06:04 -0800] 0 %CreationDate: Tue Nov 5 06:06:04 2002
D [04/Nov/2002:22:06:04 -0800] 0 %Title: printers.conf
D [04/Nov/2002:22:06:04 -0800] 0 %For: root
D [04/Nov/2002:22:06:04 -0800] 0 %Pages: (atend)
D [04/Nov/2002:22:06:04 -0800] 0 %DocumentNeededResources: font Courier-Bold
D [04/Nov/2002:22:06:04 -0800] 0 %+ font Courier
D [04/Nov/2002:22:06:04 -0800] 0 %DocumentSuppliedResources: procset texttops 1.1 0
D [04/Nov/2002:22:06:04 -0800] 0 %+ font Courier-Bold
D [04/Nov/2002:22:06:04 -0800] 0 %+ font Courier
D [04/Nov/2002:22:06:04 -0800] 0 %EndComments
D [04/Nov/2002:22:06:04 -0800] 0 %BeginProlog
D [04/Nov/2002:22:06:04 -0800] 0 %BeginResource: font Courier-Bold
D [04/Nov/2002:22:06:04 -0800] 0 %CreationDate: Wed Dec 22 1999
D [04/Nov/2002:22:06:04 -0800] Cupsomatic backend version $Revision: 2.13 $ running...
D [04/Nov/2002:22:06:04 -0800] ppd=/etc/cups/ppd/Printer.ppd
D [04/Nov/2002:22:06:04 -0800] Pondering option `page-top=36'
D [04/Nov/2002:22:06:04 -0800] Unknown option page-top=36.
D [04/Nov/2002:22:06:04 -0800] Pondering option `page-bottom=36'
D [04/Nov/2002:22:06:04 -0800] Unknown option page-bottom=36.
D [04/Nov/2002:22:06:04 -0800] Pondering option `page-left=36'
D [04/Nov/2002:22:06:04 -0800] Unknown option page-left=36.
D [04/Nov/2002:22:06:04 -0800] Pondering option `page-right=36'
D [04/Nov/2002:22:06:04 -0800] Unknown option page-right=36.
D [04/Nov/2002:22:06:04 -0800] Pondering option `cpi=12'
D [04/Nov/2002:22:06:04 -0800] Unknown option cpi=12.
D [04/Nov/2002:22:06:04 -0800] Pondering option `lpi=7'
D [04/Nov/2002:22:06:04 -0800] Unknown option lpi=7.
D [04/Nov/2002:22:06:04 -0800] Pondering option `wrap'
D [04/Nov/2002:22:06:04 -0800] Unknown bool? option wrap.
D [04/Nov/2002:22:06:04 -0800] Pondering option `scaling=100'
D [04/Nov/2002:22:06:04 -0800] Unknown option scaling=100.
D [04/Nov/2002:22:06:04 -0800] Seaerching job for option settings ...
D [04/Nov/2002:22:06:04 -0800] 0 %EndResource
D [04/Nov/2002:22:06:04 -0800] 0 %BeginResource: font Courier
D [04/Nov/2002:22:06:04 -0800] 0 %CreationDate: Wed Dec 22 1999
D [04/Nov/2002:22:06:04 -0800] CloseClient() 3
D [04/Nov/2002:22:06:04 -0800] 0 %EndResource
D [04/Nov/2002:22:06:04 -0800] 0 %BeginResource: procset texttops 1.1 0
D [04/Nov/2002:22:06:04 -0800] 0 %EndResource
D [04/Nov/2002:22:06:04 -0800] 0 %EndProlog
D [04/Nov/2002:22:06:04 -0800] 0 %Page: 1 1
D [04/Nov/2002:22:06:04 -0800] 0 %Page: 1 1
D [04/Nov/2002:22:06:04 -0800] pw = 540.0, pl = 720.0
D [04/Nov/2002:22:06:04 -0800] PageLeft = 36.0, PageRight = 576.0
D [04/Nov/2002:22:06:04 -0800] PageTop = 756.0, PageBottom = 36.0
D [04/Nov/2002:22:06:04 -0800] PageWidth = 612.0, PageLength = 792.0
D [04/Nov/2002:22:06:04 -0800] 0 %Trailer
D [04/Nov/2002:22:06:04 -0800] Saw Trailer!
D [04/Nov/2002:22:06:04 -0800] Saw EOF!
D [04/Nov/2002:22:06:04 -0800] Found: %BeginFeature: *Resolution 300ColorCMY
D [04/Nov/2002:22:06:04 -0800] Option: Resolution=300ColorCMY --> Setting option
D [04/Nov/2002:22:06:04 -0800] Found: % FoomaticOpt: Resolution=300ColorCMY
D [04/Nov/2002:22:06:04 -0800] Option: Resolution=300ColorCMY --> Setting option
D [04/Nov/2002:22:06:04 -0800] Found: %BeginFeature: *PageSize Letter
D [04/Nov/2002:22:06:04 -0800] Option: PageSize=Letter --> Setting option
D [04/Nov/2002:22:06:04 -0800] Found: % FoomaticOpt: PageSize=Letter
D [04/Nov/2002:22:06:04 -0800] Option: PageSize=Letter --> Setting option
D [04/Nov/2002:22:06:04 -0800] /usr/lib/cups/filter/cupsomatic: inserted option PS code:
D [04/Nov/2002:22:06:04 -0800] gs PID pid2=3928
D [04/Nov/2002:22:06:04 -0800] gs command: gs -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="HP DeskJet 4" -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- -
D [04/Nov/2002:22:06:04 -0800] foomatic-gswrapper: gs '-dBATCH' '-dPARANOIDSAFER' '-dQUIET' '-dNOPAUSE' '-sDEVICE=ijs' '-sIjsServer=hpijs' '-sDeviceManufacturer=HEWLETT-PACKARD' '-sDeviceModel=HP DeskJet 4' '-dDEVICEWIDTHPOINTS=612' '-dDEVICEHEIGHTPOINTS=792' '-r300' '-sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1' '-dIjsUseOutputFD' '-sOutputFile=/dev/fd/3' '/dev/fd/0' 3>&1 1>&2
D [04/Nov/2002:22:06:04 -0800] unable to set device=0, err=16
D [04/Nov/2002:22:06:04 -0800] **** Unable to open the initial device, quitting.
D [04/Nov/2002:22:06:04 -0800] Couldn't exec foomatic-gswrapper -q -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=ijs -sIjsServer=hpijs -sDeviceManufacturer="HEWLETT-PACKARD" -sDeviceModel="HP DeskJet 4" -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -r300 -sIjsParams=Quality:Quality=0,Quality:ColorMode=2,Quality:MediaType=0,Quality:PenSet=1 -dIjsUseOutputFD -sOutputFile=- - at /usr/lib/cups/filter/cupsomatic line 1097.
D [04/Nov/2002:22:06:04 -0800] unable to read client data err=-2
D [04/Nov/2002:22:06:04 -0800] tail process done writing data to *main::STDOUT
D [04/Nov/2002:22:06:04 -0800] KID4 finished
D [04/Nov/2002:22:06:04 -0800] Main process finished
D [04/Nov/2002:22:06:04 -0800] UpdateJob: job 38, file 0 is complete.
D [04/Nov/2002:22:06:04 -0800] CancelJob: id = 38
D [04/Nov/2002:22:06:04 -0800] StopJob: id = 38, force = 0
D [04/Nov/2002:22:06:04 -0800] StopJob: printer state is 3
