Re: [Cooker] Mustek ScannerExpress 1200CU doesn't work anymore

[Till Kamppeter]

As I saw that an image was attached I thought that you obtained bad scanning quality. Didn't know that it is a screenshot of scannerdrake.

Can you try to set up the scanner manually? The driver is "mustek_usb", according to

http://sane.informatik.uni-freiburg.de/cgi-bin/driver.pl?manu=mustek&model=&bus=any

So add a line containing only "mustek_usb" to the /etc/sane.d/dll.conf file, take care that your /etc/sane.d/mustek_usb.conf file is not empty (put in the line "usb 0x055f 0x0001" if so), and load the "scanner" kernel module with "modprobe scanner". Then you can start "xsane" or every other scanning program and your scanner should be recognized. Do not run "scannerdrake".

Till

Robert Fox wrote:

Strange - I'm on the same list and I got the picture.

It basically says that the scanner is not in the database - do I want to
configure manually.  When I click YES - it does nothing - same with NO

Let me know if you need more info.

Thx,
R.Fox


On Mon, 2003-01-20 at 18:12, Till Kamppeter wrote:

Unfortunately, the mailing list software which is running the Cooker list cannot handle attachements. Can you make the image available on a web server or send it directly to me? Or you post your problem on the SANE developmenmt mailing list on http://www.mostang.org/sane/ It is probably a new bug introduced in SANE 1.0.9.

Till


Robert Fox wrote:

Since the last two releases of SANE under Cooker I can't use my Mustek scanner.