Hello everyone! My name is Bogdan and I'm living in Slovenia. I'm new to this list and I'm writing because I (already) need some help. I just received my MP 2100 from ebay/variety-shop. It have some scratches here and there but seems much snappier than my previous 120 :o). The problem is that it came - of course - without dongle or any cable. I just thought that I can use the infrared port to connect it to my Wallstreet PowerBook. After a couple of unsuccessfull attempts, I just looked on the web for more info and discovered in horror that NCU doesn't support infrared despite looking that it does so!!!
There is no software installed on the Newton except some EZShow driver. The available hw I have is: - a Pretec 32MB Flash card - a Hayes Optima 33.6 modem - eventually tomorrow I will meet someone who have a MP 120 with its cables. There is any way to connect it to my Mac via IrDA? There is any way to copy packages from the PB on the 32MB Flash card? I can maybe dial-in somehow with the modem into the PowerBook? Or I can copy the pkg's I want from the Wallstreet via serial cable to that 120 and beam them to the 2100? Something like this: Wallstreet -- serial cable --> MP 120 -- beam --> 2100 Well, this is it, I have no other ideas how to solve it. But maybe some of you does... hopefully :o) Thank you, Bogdan -- NewtonList is sponsored by <http://lowendmac.com/> and... Shop buy.com and save. <http://lowendmac.com/ad/buy.com.html> Support Low End Mac <http://lowendmac.com/lists/support.html> NewtonList info: <http://lowendmac.com/lists/newton.html> Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/newtonlist%40mail.maclaunch.com/> Using a Macintosh? Get free email and more at Applelinks! <http://www.applelinks.com>
