On Wed, Nov 1, 2017 at 8:49 AM, Chuck Lever <chuck.le...@oracle.com> wrote: > >> On Nov 1, 2017, at 10:53 AM, Pradeep <pradeeptho...@gmail.com> wrote: >> >> Adding linux-nfs (did not work last couple of times because of email format). >> >> Is this supposed to work with Linux NFS clients (see the problem >> description at the end of this email)? > > Yes. I've used referrals successfully with upstream kernels in the > past week (against non-Linux servers, even). > > Looks like this is a RHEL issue, though. Should you report the > issue to Red Hat? >
You can easily reproduce this on Ubuntu 16.04 as well (we have tried
up to 4.9.37).
>
>> The NFSv4 referrals with Linux clients does not work with 'stat', 'ls'
>> etc., But linux client follows referrals after a 'cd'. Is this the
>> expected behavior?
>
> I think so. "ls -l" in the parent directory isn't going to trigger
> a mount, but "cd" will. After the mount, the mounted on directory
> on the client will appear as expected with "ls -l".
>
'ls -l' will show incorrect stats if referral is not followed. Client
doesn't seem to
use attributes from READDIR (or it throws away that).
stat shows output like this for referral directories - you can see
from tcpdump that server(nfs-ganesha) sent the attributes correctly.
$ stat /mnt/dir.0
File: ‘/mnt/dir.0’
Size: 0 Blocks: 0 IO Block: 1048576 directory
Device: 26h/38d Inode: 1085 Links: 2
Access: (0555/dr-xr-xr-x) Uid: (4294967294/ UNKNOWN) Gid:
(4294967294/ UNKNOWN)
Context: system_u:object_r:nfs_t:s0
Access: 1969-12-31 16:00:00.000000000 -0800
Modify: 1969-12-31 16:00:00.000000000 -0800
Change: 1969-12-31 16:00:00.000000000 -0800
Birth: -
>
>> tcpdump is attached.
>
> Traffic to the destination server might be going over a different
> network interface. Check your tcpdump command line.
>
I have only one network interface.
> You could also enable NFS and/or RPC debugging (before reproducing)
> to see the steps taken by the client displayed in /var/log/messages.
>
> # rpcdebug -m nfs -s
> # rpcdebug -m rpc -s
>
debug messages from /var/log/messages is attached (see readdir.log and
stat.log).
The 'ls -l' output is below. 'dir.0' is the referral directory.
$ ls -l /mnt
total 0
dr-xr-xr-x. 2 4294967294 4294967294 0 Dec 31 1969 dir.0
drwxrwxr-x. 2 pradeep pradeep 6 Oct 16 17:07 dir.1
drwxrwxr-x. 2 pradeep pradeep 6 Oct 16 17:07 dir.2
The problem appears to be in the code path below:
nfs4_proc_lookup_common -> _nfs4_proc_lookup -> nfs4_get_referral ->
nfs_fixup_referral_attributes
/* Fixup attributes for the nfs_lookup() call to nfs_fhget() */
nfs_fixup_referral_attributes(&locations->fattr);
/* replace the lookup nfs_fattr with the locations nfs_fattr */
memcpy(fattr, &locations->fattr, sizeof(struct nfs_fattr));
'fattr' will never have attributes other than FSID and fs_locations.
>
>>>> On Mon, Oct 30, 2017 at 3:24 PM, Frank Filz <ffilz...@mindspring.com>
>>>> wrote:
>>>>>
>>>>> Oh, I had forgotten about that patch…
>>>>>
>>>>>
>>>>>
>>>>> Can you try any other clients? This may be a client issue (I did see some
>>>>> suspicious code in the client).
>>>>>
>>>>>
>>>>>
>>>>> It may also be that you need a fully qualified path (starting with a /).
>>>>>
>>>>>
>>>>>
>>>>> It looks like Ganesha is doing the right thing though.
>>>>>
>>>>>
>>>>>
>>>>> Frank
>>>>>
>>>>>
>>>>>
>>>>> From: Pradeep [mailto:pradeep.tho...@gmail.com]
>>>>> Sent: Monday, October 30, 2017 2:21 PM
>>>>> To: Frank Filz <ffilz...@mindspring.com>
>>>>> Cc: nfs-ganesha-devel <nfs-ganesha-devel@lists.sourceforge.net>;
>>>>> ssaurabh.w...@gmail.com
>>>>> Subject: Re: [Nfs-ganesha-devel] NFSv4 referrals not working with
>>>>> ganesha.
>>>>>
>>>>>
>>>>>
>>>>> Hi Frank,
>>>>>
>>>>>
>>>>>
>>>>> This is with latest version of Ganesha. The referral support is already
>>>>> in VFS: https://review.gerrithub.io/c/353684
>>>>>
>>>>>
>>>>>
>>>>> tcpdump is attached. From the tcpdump, we can see that the stat sent a
>>>>> LOOKUP for the remote export and received a moved error. It also sent back
>>>>> the fs_locations. But the client (CentOS 7.3) never followed that with a
>>>>> LOOKUP to the remote server.
>>>>>
>>>>>
>>>>>
>>>>> You can see that packet #41 has the correct FS locations. But client does
>>>>> not do another lookup to get the correct attributes.
>>>>>
>>>>>
>>>>>
>>>>> $ stat /mnt/nfs_d1
>>>>>
>>>>> File: ‘/mnt/nfs_d1’
>>>>>
>>>>> Size: 0 Blocks: 0 IO Block: 1048576 directory
>>>>>
>>>>> Device: 28h/40d Inode: 1 Links: 2
>>>>>
>>>>> Access: (0555/dr-xr-xr-x) Uid: (4294967294/ UNKNOWN) Gid: (4294967294/
>>>>> UNKNOWN)
>>>>>
>>>>> Context: system_u:object_r:nfs_t:s0
>>>>>
>>>>> Access: 1969-12-31 16:00:00.000000000 -0800
>>>>>
>>>>> Modify: 1969-12-31 16:00:00.000000000 -0800
>>>>>
>>>>> Change: 1969-12-31 16:00:00.000000000 -0800
>>>>>
>>>>> Birth: -
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Mon, Oct 30, 2017 at 12:13 PM, Frank Filz <ffilz...@mindspring.com>
>>>>> wrote:
>>>>>
>>>>> What version of Ganesha? I assume by “native” FSAL, you mean FSAL_VFS?
>>>>> Did you add the fs locations XATTR support? FSAL_GPFS currently has the
>>>>> only
>>>>> in-tree referral support and I’m not sure it necessarily works, but I’m
>>>>> unable to test it.
>>>>>
>>>>>
>>>>>
>>>>> If you have code for FSAL_VFS to add the fs locations attribute, go ahead
>>>>> and post it and I could poke at it.
>>>>>
>>>>>
>>>>>
>>>>> Also, tcpdump traces might help understand what is going wrong.
>>>>>
>>>>>
>>>>>
>>>>> Frank
>>>>>
>>>>>
>>>>>
>>>>> From: Pradeep [mailto:pradeep.tho...@gmail.com]
>>>>> Sent: Monday, October 30, 2017 11:45 AM
>>>>> To: nfs-ganesha-devel <nfs-ganesha-devel@lists.sourceforge.net>
>>>>> Cc: ssaurabh.w...@gmail.com
>>>>> Subject: [Nfs-ganesha-devel] NFSv4 referrals not working with ganesha.
>>>>>
>>>>>
>>>>>
>>>>> Hi all,
>>>>>
>>>>>
>>>>>
>>>>> We are testing NFSv4 referral for Linux CentOS 7 with nfs-ganesha and are
>>>>> running
>>>>>
>>>>> into some serious issues.
>>>>>
>>>>>
>>>>>
>>>>> Although, we were able to set up NFSv4 referral using the native Ganesha
>>>>> FSAL,
>>>>>
>>>>> we could not get it fully functional for all Linux client system calls.
>>>>>
>>>>> Basically, the NFSv4 spec suggests to return a NFS4ERR_MOVED on a
>>>>>
>>>>> LOOKUP done for a remote export. However, this breaks the `stat` system
>>>>> call on
>>>>>
>>>>> Linux CentOS 7 (stat’ results in a LOOKUP,GETFH,GETATTR compound). An
>>>>> easy way to
>>>>>
>>>>> reproduce the broken behavior is:
>>>>>
>>>>> 1) mount the root of the pseudo file system and
>>>>>
>>>>> 2) issue a `stat` command on the remote export.
>>>>>
>>>>> The stat returned are corrupt.
>>>>>
>>>>>
>>>>>
>>>>> After digging into the CentOS 7 client code, we realized that the stat
>>>>> operation
>>>>>
>>>>> is never expected to follow the referral. However, switching to returning
>>>>> NFS4_OK
>>>>>
>>>>> for stat, then breaks `cd` or a `ls -l` command, because now we don't
>>>>> know when
>>>>>
>>>>> to follow the referral.
>>>>>
>>>>>
>>>>>
>>>>> Does anyone have a successful experience in setting up the NFSv4
>>>>> referrals that
>>>>>
>>>>> they could share? Or, if some suggestions on what we might be doing
>>>>> wrong?
>>>>>
>>>>>
>>>>>
>>>>> Thanks
>>>>>
>>>>>
>>>>>
>>>>> Virus-free. www.avast.com
>>>>>
>>>>>
>>>>
>>>>
>>>
>> <nfs_remote_export1.pcap>
>
> --
> Chuck Lever
>
>
>
readdir.log
Description: Binary data
stat.log
Description: Binary data
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________ Nfs-ganesha-devel mailing list Nfs-ganesha-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nfs-ganesha-devel
