Hi,
When adding a new continuous/shadow profile,I experienced one problem.
the nfsen didn't work as before,and the graph stopped updating.
After checking the log file, I found the error message "nfprofile failed:".
I made two channel for this profile,and both channel have the same filter.
In the filter,there are more than 1500 IP. the filter is such as "src ip
10.5.24.10 or src ip 172.16.1.9 or ...".
I think the filter is the cause of the problem,because I try to change the
filter file to make the IP number be less than 1500, and restart the
nfsen,then the nfsen can work normally. I found that the nfsen can work
normally if the filter's IP number is less than 1500. but I don't know how
to fix it.
I use nfsen 1.3b-20070824 + nfdump 1.5.6 on FreeBSD, and I have added
compile options "--enable-nfprofile"
Any suggestions greatly appreciated!
lixin
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Nfsen-discuss mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
