Hi all, I have nfdump/nfsen running with 6 sources. Live profile is running ok, however the continous profiles that I configure on nfsen interface are not working correctly, they are not getting filled by the live profile information. They are completely empty.
This is my software information. nfdump: Version: 1.5.7 nfsen: 1.3 With --nfprofile enabled. and example of one of my Profiles is: # name = Port80 group = . tbegin = 1212732000 tcreate = 1212776783 tstart = 1213221233 tend = 1214007900 updated = 1214007900 expire = 0 maxsize = 0 size = 0 type = 2 locked = 0 status = OK version = 130 channel = 7200:+:#0000ff:3:7200 channel = 185:+:#ff0000:2:185 channel = 183:+:#00ff00:1:183 and the info for the live profile is: name = live group = . tbegin = 1212715800 tcreate = 1212715800 tstart = 1212892500 tend = 1214007900 updated = 1214007900 expire = 336 maxsize = 0 size = 10066419712 type = 0 locked = 0 status = OK version = 130 channel = willawaw:+:#64FF45:4:willawaw channel = 7200:+:#0000ff:1:7200 channel = tarmonter:+:#FFFF60:5:tarmonter channel = 185:+:#ff0000:2:185 channel = jaguaro:+:#3D2BFF:6:jaguaro channel = 183:+:#00ff00:3:183 Any ideas what can I do to get this up and running? thanks, Jose BogarÃn ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Nfsen-discuss mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
