Hi, After getting NFSen up and running I want to set an alarm for traffic exceeding a certain amount, but that alarm never fires.
To be specific: I've got two routers monitored with ~ 20MBit/sec traffic each. I want to trigger an alarm that should fire once traffic exceeds 30MBit/sec. Here's what I defined under "Alerts": o) "Filter applied to 'live' profile": nothing changed here - both routers are marked on the left o) "Conditions based on individual Top 1 statistics": Bits/s of Top Any IP Address > 2 M o) "Action:" Send alert - Email address entered Here's what I got: Under "Alert Infos:" near the bottom of the screen I see an chart that says "Flows/s" - but no data in it. Likewise the table below that graph has "0" (zero) in every field. I've also tried to set "Conditions" to "Conditions based on total flow summary": (radio button) with a condition of "bits/s > Absolute value 2M" - same result - no alarm fired, nothing in the graph on the Alerts page. Please note that the Alert displays as "armed" and "enabled" (check mark) Also note that normal netflow statistics are there - available under the "Graph" oder "Details" tab. Any idea what can be wrong here? Thanks much in advance for any clue, -ewald ------------------------------------------------------------------------------ _______________________________________________ Nfsen-discuss mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
