Hi Adrian,
I enabled netflow on router below :
interface Vlan1
ip address 192.168.2.1 255.255.255.192
ip flow ingress
ip flow-export source Loopback0
ip flow-export version 5
ip flow-export destination x.x.x.x 5000
Is the above command is suufficient to send whole information required
by tool or i have to enable "ip flow ingress" command on each port.
As you suggested to set a sample rate for each collector how to do it.
I tied to create new profile using filter "inet6" but its not taking it
showing error.
regards,
Nitin
On 18-02-2014 12:39, Adrian Popa wrote:
If you are using netflow sampling you will probably need to set the
sample rate for each collector (the -s switch), if it isn't
autodetected. To monitor only ipv6 traffic create a new profile with
this filter "inet6".
On Tue, Feb 18, 2014 at 8:37 AM, Nitin <[email protected]
<mailto:[email protected]>> wrote:
Thanks Adrian for quick response.
In graphs traffic is showing too low while monitoring via MRTG
same router is huge difference.
I want to monitor IPv6 traffic on my router but how to set filters
for the same .
regards,
nitin
On 17-02-2014 16:35, Adrian Popa wrote:
Make sure the nfsen process is started and it's running.
On Mon, Feb 17, 2014 at 10:21 AM, Nitin <[email protected]
<mailto:[email protected]>> wrote:
Hi All,
Things are working fine now
Getting the below error :
ERROR: nfsend connect() error: Connection refused!
ERROR: nfsend - connection failed!!
ERROR: Can not initialize globals!
Any guidance on the above isuue will be grateful
Regards,
Nitin
On 11-02-2014 13:27, Nitin wrote:
Dear ALL,
while running ./install.pl <http://install.pl>
etc/nfsen.conf getting below error :
[root@cprakash nfsen-1.3]# ./install.pl <http://install.pl>
etc/nfsen.conf
Check for required Perl modules: All modules found.
RRD version '1.4008' not yet supported!
Regards,
Nitin
------------------------------------------------------------------------------
Android apps run on BlackBerry 10
Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
Now with support for Jelly Bean, Bluetooth, Mapview and more.
Get your Android app in front of a whole new audience. Start
now.
http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
_______________________________________________
Nfsen-discuss mailing list
[email protected]
<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
------------------------------------------------------------------------------
Managing the Performance of Cloud-Based Applications
Take advantage of what the Cloud has to offer - Avoid Common Pitfalls.
Read the Whitepaper.
http://pubads.g.doubleclick.net/gampad/clk?id=121054471&iu=/4140/ostg.clktrk
_______________________________________________
Nfsen-discuss mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
