I'm not sure if the port isn't the issue. Can you try a different port for the Cisco2 device? A different port means a different collector process as well.
On Thu, Oct 15, 2015 at 10:46 AM, LE-BRETTON, ELOUAN (ELOUAN) < [email protected]> wrote: > Here it is. > > > > %sources = ( > > # 'upstream1' => { 'port' => '9995', 'col' => '#0000ff', 'type' => > 'netfl$ > > # 'peer1' => { 'port' => '9996', 'IP' => '172.16.17.18' }, > > # 'peer2' => { 'port' => '9996', 'IP' => '172.16.17.19' }, > > 'Cisco2' => { 'port' => '2055' , 'col' => '#0000FF' , 'IP' => 'u.v.w.x$ > > 'STSD' => { 'port' => '2055' , 'col' => '#CC00CC' , 'IP' => a.b.c.d' }, > > ); > > > > STSD is the router I was collecting on the PC and whose data I transferred > to the server > > Cisco2 is the routeur I’m collecting on my serveur. > > > > At the moment I’ve come up with two possible explanations, I’ve hadn’t > found the time to test if one is the correct one: > > 1. The time when the collection on STSD is before nfsen was > installed: maybe this creates a problem because I’m trying to add data in > ‘live’ profile before it was created ? > > 2. I’ve used this command: Launch command : nfsen –r live > all. Maybe I should create another profile, a history profile, to avoid > conflict between the live profile and the data?? > > > > *De :* Adrian Popa [mailto:[email protected]] > *Envoyé :* jeudi 15 octobre 2015 08:09 > *À :* LE-BRETTON, ELOUAN (ELOUAN) > *Cc :* [email protected] > *Objet :* Re: [Nfsen-discuss] Copy collected data from PC to server > > > > Can you show us your %sources config? > > > > On Wed, Oct 14, 2015 at 5:00 PM, LE-BRETTON, ELOUAN (ELOUAN) < > [email protected]> wrote: > > Hi, > > > > Here is my situation : a few weeks ago, I’ve installed nfsen on a PC and > used it to collect data from a source. Let’s call Let’s call that source > sourcePC. Now I’ve installed nfsen on a server, and I use it to collect > data from another router, let’s call that source SourceServer. It all works > fine. > > Now I want to import the data collected on the PC into the server. > > I’ve tried the following steps: > > - On the server, added sourcePC (using the same settings that I > used on the PC). > > - On the server, copy the data coming from the PC > > - Launch command : nfsen –r live all > > > > At first it seemed to work: I could see the data coming from sourcePC, see > the graph, launch some filters and stuff > > > > But then, I realized that the sourceServer didn’t work properly anymore: > no new data was available from sourceServer. I’ve checked that the server > was receiving netflow parquets from sourceServer (using Wireshark). If I > remove sourcePC from the nfsen config file on the server, then it’s working > properly… > > > > I don’t know what I should do now: how can I import the data that I > collected on my PC into the server ? > > > > Regards, > > Elouan > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > Nfsen-discuss mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/nfsen-discuss > > >
------------------------------------------------------------------------------
_______________________________________________ Nfsen-discuss mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nfsen-discuss
