http://threepeaksproducts.com/products/gibbslube/ here is the link again :-D
On Wed, Mar 18, 2009 at 1:11 PM, Josh Bowlin <schwah...@gmail.com> wrote: > in one of the posts i posted a link, thats the link that i will probably > buy my next case off of. its 110 for 12 cans, but again, i cant stress how > much it is worth it. > > > On Wed, Mar 18, 2009 at 12:35 PM, Mark Hasslinger > <markh...@sbcglobal.net>wrote: > >> >> >> oooohh K. where do you buy it? locally. is there a web site for the oil >> itself and not some second party distrubuter? >> >> >> --- On Wed, 3/18/09, Josh Bowlin <schwah...@gmail.com> wrote: >> >> > From: Josh Bowlin <schwah...@gmail.com> >> > Subject: [Nighthawk Lovers] Re: Choke not operating properly >> > To: nighthawk_lovers@googlegroups.com >> > Date: Wednesday, March 18, 2009, 8:51 AM >> > Ok the story behind me and gibbs is as follows. My dad and >> > i run antique >> > gas engines. When I was 10 we were at our summer show and >> > there was a gentle >> > men who gave my father a 4oz sample can. At that point and >> > time my father >> > had just restored a john deer tractor and the throttle was >> > sticking sooo bad >> > that he would have to ball up a fist and knock on it pretty >> > hard to get the >> > tractor to idle faster, and he would have to hit it hard >> > several times to >> > get it to rev the motor up. Well he tried all kinds of >> > things, WD-40, oil, >> > grease, etc..well he sprayed some gibbs on it and we were >> > both like Meh it >> > wont work... Well as most things we got busy and it sat for >> > a day or two, >> > then we went out and fired up the tractor, my dad reached >> > up with a balled >> > fist and knocked on the throttle like he normally would and >> > damn >> > near broke the throttle off the tractor. Since that day i >> > have lived by the >> > stuff. You can use it as a lubricant, a cleaner, a >> > rubber/plastic >> > protectant, we have used it like ether to make an engine >> > fire, we have >> > polished chrome and metal with it, it prevents rust. We >> > have sprayed it on >> > distributers and it works as a waterproofer. Now i dont >> > know how many of >> > you know how a distrubutor works on an engine but if they >> > get wet they are >> > royally screwed till they dry out. Well im confident >> > enough (and ive done >> > it before) that i willl spray down the distributer with >> > gibbs and then dump >> > a bucket of water on it with the engine/motor running and >> > guarantee it wont >> > miss a lick. So in other words I replaced my can of WD-40 >> > about 13 years >> > ago and use the gibbs for what it could do and then some. >> > if you have >> > any other types of questions about it just ask lol. >> > >> > On Wed, Mar 18, 2009 at 8:37 AM, Creative Residential >> > Designs < >> > finderskeep...@qwest.net> wrote: >> > >> > > Hey Josh...how does the Gib's compare to WD-40? I >> > live by WD-40 and keep >> > > a can next to my bike at all times. I anoint my bikes >> > from top to bottom >> > > with a rag o' WD-40 chrome and all. It stops rust >> > on my chrome dead in it's >> > > tracks along with all of it's other applications. >> > I'm always open to try a >> > > new thing though. HotrodMamma. >> > > >> > > ----- Original Message ----- >> > > *From:* Josh Bowlin <schwah...@gmail.com> >> > > *To:* nighthawk_lovers@googlegroups.com >> > > *Sent:* Wednesday, March 18, 2009 7:03 AM >> > > *Subject:* [Nighthawk Lovers] Re: Choke not operating >> > properly >> > > >> > > http://threepeaksproducts.com/products/gibbslube/ >> > > >> > > On Wed, Mar 18, 2009 at 8:02 AM, Josh Bowlin >> > <schwah...@gmail.com> wrote: >> > > >> > >> I use a product called Gib's, something i live >> > by. But if you dont have >> > >> any you can always try to put some wd-40 on the >> > choke cable to make sure its >> > >> lubed correctly or you can check to make sure its >> > not getting stuck up on >> > >> the carbs or just pure and simple stuck on the >> > carbs. Also try some wd-40 >> > >> on the working mechanism on the carbs. >> > >> >> > > >> > > > >> > > >> > >> > >> >> >> >> > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lovers@googlegroups.com To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
