Hi Nighthawk Group!

Any suggestions on how to service the tachometer?  I'm looking at
buying a 1982 CB450SC that has been brought back to life after 10+
years in a garage. Today the seller and I replaced the fork seals and
all looked good there. The tacho problem is that it is highly
overdamped. Maybe it will show the correct RPM if you give it enough
time to settle-out.  The seller commented that he didn't notice the
problem until today b/c he's been riding it and not rapping on the
throttle as much as a newbie like me did today. The cable seems to
spin as fast as the motor turns it: no dragging.

My understanding of mechanical tachos is that there's a small drum or
magnets spinning in the tacho body and another drum or something with
the needle attached that is concentric with the drum driven by the
cable. The faster the driven drum spins, the more viscous (or
magnetic) forces torque the second drum around and indicate a faster
engine RPM. Knowing that the bike has been sitting around for years,
I'm guessing that if there is some sort of fluid coupling between the
drums and the fluid has all leaked out the coupling would be weak.
This is all speculation since we were not able to get the tacho casing
apart.

Any suggestions?

--Steve

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to