Is this a dare ? First start with a leak down to determine the actual cause. If 
it's a valve, it can get dicey fast. A stuck open valve can be hit by the 
moving piston ( not good) Let's suppose it didn't get hit (hope springs 
eternal) and the cause is some gunk in the guide. This has been seen quite 
often in PE this year. Snake oil in the crankcase may help (IE: Sea Foam, MMO, 
etc.). In either case it should make valve noise. Does it ? There are other 
causes too. Hole in piston, stuck rings, cam lobes worn down..... Leak down and 
adjust price accordingly. $1250 is way too much for one of those with serious 
problems. If need be, remove head cover. If you don't, somebody else will have 
to. If it is a really nice bike, I'd take some time to get to the bottom of 
this before plunking down cash. If it's a rat, walk away. Unless you have the 
skill, knowledge and resources to perform upper end work on one of those, it's 
no bargain. A Honda shop will charge
 big-time to repair it if they even will accept a bike that old (some don't) Go 
low and slow with a deal like this. In my world, I think of a good specimen as 
being worth about 2500.You'll be way over that after a professional repair. 
Even as a do-it-yourself project, there is the propect of obtaining parts. 
Internal probelems need careful diagnostics to determine a course of action. 
Maybe you and the owner can split the cost of a leak down. 


--- On Tue, 12/22/09, Graham Rogers <[email protected]> wrote:

From: Graham Rogers <[email protected]>
Subject: Re: [Nighthawk Lovers] 85 nighthawk 700sc
To: [email protected]
Date: Tuesday, December 22, 2009, 5:20 PM

Hi Wynn, I'm keen to see what Dennis has to say about that,  Graham

On Dec 22, 2009, at 5:17 PM, [email protected] wrote:

> Hi all, Merry Christmas. I have found an 85 700 for $1250 that has  
> 0 compression in #1 all others are good. The owner feels it is a  
> stuck valve. The inside of the cylinder looks clean. I am just  
> looking for any input on what may be wrong other than the valve. If  
> it is the valve will it unstick or is this a larger mechanical  
> issue. The bike last ran last(this) summer with a lot of throttle.  
> Thanks, Wynn
>
> --
>
> You received this message because you are subscribed to the Google  
> Groups "Nighthawk Motorcycle Lovers!" group.
> To post to this group, send email to  
> [email protected].
> To unsubscribe from this group, send email to nighthawk_lovers 
> [email protected].
> For more options, visit this group at http://groups.google.com/ 
> group/nighthawk_lovers?hl=en.

--

You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.





      

--

You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.


Reply via email to