Is this something you can just pick up at the auto parts store?
On Fri, Jan 15, 2010 at 11:11 AM, stanley/ Randolph <[email protected]>wrote: > Due to the fact that steel wool is harder and more abrasive than rubbing > compound, and will leave particles lodged in the pocks, I would not > recommend it. We learned about this when I was in the Air Force, because > proud crew chiefs back in WWII would use steel wool to polish their > planes. If you have ever used steel wool - Brillo or SOS pads - to polish > an alluminum pot, it will make it really shiny, but--- > If they (airplanes - and pots also) sat for any length of time in the > weather, they would notice little red spots, which were bits of steel wool > stuck in the aluminum skin. > Medium or Fine Cut Cleaner is your best bet, or something equivalent. I > used to detail professionally and I always used Fine Cut Cleaner, > specifically for buffing machines. > *Stanley* > > > --- On *Fri, 1/15/10, Graham Rogers <[email protected]>* wrote: > > > From: Graham Rogers <[email protected]> > > Subject: Re: [Nighthawk Lovers] I'm gonna practice painting on side-panel's > 1st > To: [email protected] > Date: Friday, January 15, 2010, 7:04 AM > > > fine steel wool does a good job. > > On Jan 15, 2010, at 7:55 AM, Theresa Hutchison wrote: > > Speaking of painting and fixing up... Is there anyway to clean up the > chrome after a bike has sat for YEARS...??? It's got little tiny rust > sposts here and there and I'm really not sure what to do with it or if > anything really can be done at all... > > ~Traccie > > > > On Thu, Jan 14, 2010 at 10:07 PM, > <[email protected]<http://us.mc535.mail.yahoo.com/mc/[email protected]> > > wrote: > >> If I could get the fender's off easily I'd do them >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to >> [email protected]<http://us.mc535.mail.yahoo.com/mc/[email protected]> >> . >> To unsubscribe from this group, send email to >> [email protected]<http://us.mc535.mail.yahoo.com/mc/compose?to=nighthawk_lovers%[email protected]> >> . >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> >> > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to > [email protected]<http://us.mc535.mail.yahoo.com/mc/[email protected]> > . > To unsubscribe from this group, send email to > [email protected]<http://us.mc535.mail.yahoo.com/mc/[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<nighthawk_lovers%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<nighthawk_lovers%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > >--
You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to [email protected].
For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
