Really like the strong magnet idea. Might be the simplest to do. It could also be tethered with a short wire cable for extra safety should it bounce loose.
On Wed, Oct 19, 2011 at 12:52 PM, Kyle Munz <kyle...@gmail.com> wrote: > I've thought about glassing a strong magnet onto the inside of the side > cover myself. > > -Kyle > > > On Wed, Oct 19, 2011 at 11:14 AM, Bill Sandifer <wordzen...@gmail.com>wrote: > >> Amazing that you found the cover. I once had a large sailboat hatch slider >> blow off while trailering. Spent hours looking and never found it. With a >> little minor engineering you can use brass round-top screws (the kind that >> were used to secure cabinet doors in spring receptacles) to replace the >> shorn tits. A carefully drilled hole, a bit of epoxy and it should snap in >> place. Ace Hardware may still have them. Failing that, a little double-sided >> tape might work. >> >> >> On Wed, Oct 19, 2011 at 8:48 AM, Dave <heed...@gmail.com> wrote: >> >>> My right side cover blew off the other day on a ride from my place near >>> Williamsport to Sunbury (both PA) the other day... The cover was found, but >>> 2 out of the 3 pegs are missing... anyone have a cover they'd be willing to >>> part with cheap? My bike is the red, white, blue color scheme. Also, >>> anyone know where I can get the paint and decal set at a relatively cheap >>> price? My tank needs to be repainted this winter. While i'm on the subject >>> of needing help, I know my carbs could use a thorough cleaning, I've never >>> done carb work, so I'd like to take it to someone, watch/help, so that I can >>> do it on my own later, anyone in the general vicinity (riding distance of >>> Williamsport, PA) that I could hit up for help? Thanks all! -Dave >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "Nighthawk Motorcycle Lovers!" group. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msg/nighthawk_lovers/-/XYx3MyB7jsYJ. >>> To post to this group, send email to nighthawk_lovers@googlegroups.com. >>> To unsubscribe from this group, send email to >>> nighthawk_lovers+unsubscr...@googlegroups.com. >>> For more options, visit this group at >>> http://groups.google.com/group/nighthawk_lovers?hl=en. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To post to this group, send email to nighthawk_lovers@googlegroups.com. >> To unsubscribe from this group, send email to >> nighthawk_lovers+unsubscr...@googlegroups.com. >> For more options, visit this group at >> http://groups.google.com/group/nighthawk_lovers?hl=en. >> > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to nighthawk_lovers@googlegroups.com. > To unsubscribe from this group, send email to > nighthawk_lovers+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lovers@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
