ya I'd like some pics. Always nice to see how someone else approached
a problem.
Oh and if you need to a 450 will fit inside a 10' slide in camper. I
think we had to wiggle left and right to get the bars through the
door but it fit. Nothing to strap to inside so I just jammed all my
bedding and cushions in beside it.
At 07:13 PM 2/23/2012, you wrote:
When I bought my NH 750, I had to bring it home about 90 miles in the
back of my F-150. Besides using 6 ratcheting tie downs, I also built
a jack (for lack of a better term) to hold the front wheel in place in
the truck bed. I used a couple old 2x4's I had lying around. It
actually worked so well (surprise to me) that it would hold the bike
upright without either kickstand or anu straps. It made ratcheting
the straps much easier, and you didn't have to worry about the bike
sliding out for under you while tightening down or traveling. I
actually kept the jack for future use, so if you are intersted in
building one yourself I'll take some pictures and post them. The
whole thing probably cost less than $5.00, even today.
Pat Patterson
Abbotsford, BC, Canada
VA7PDP
2001 PT Cruiser
83 450 Honda Nighthawk
78 F350 460/C6 on propane
71 Bronco 302/C4/D20 D44/9" {o===o}
"Just add Lightness-"
Colin Chapman. (1928 - 1982)
--
You received this message because you are subscribed to the Google Groups "Nighthawk
Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/nighthawk_lovers?hl=en.
