So I've got almost 700 miles on my resurrected 450 and I just realized that the handlebar is bent. It's obvious this bike fell over in storage at some point so I had to replace the drivers peg on the ride side and the throttle grip has a little tear in it that allowed rust to develop between the grip and the bar, which I sanded and lubed to get smooth throttle action, but it took me this long to realize the bar is slightly bent. Of course now I can't stop staring at them so I need to replace the bar. I'm sure I'm not going to find a factory duplicate replacement so I'm wondering if anybody know what the Width, Rise and Pullback on the 450 bar is. partsnmore<http://www.partsnmore.com/parts/honda/cb450sc/?filters%5Bcategory%5D=chassis&filters%5Bprice%5D=50&filters%5Bfitting%5D=universal&filters%5Bpage%5D=2&filters%5Bper_page%5D=25>has lots of universal handlebars, including a couple that have a similar shape, but I'm not sure how to measure the bar on there now to be able to order a replacement. Any help or tips?
Thanks, Kevin -- Kevin Green - Orlando, FL --------------------------------- 1982 Honda Nighthawk 450 - CB450SC -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
