I read somewhere,maybe here, that the only way to check one is to put it on another bike.I plugged the boxes into my running bike and it would not fire. I plugged the originals back and it fired right up. So off to Ebay I went. We'll see what happens when the new ones arrive.
On Saturday, November 17, 2012 11:32:02 PM UTC-5, brian lindsley wrote: > > I had the #1 cyclender stop putting out spark. Went through the > check list thats in the shop manuel check coil check wires ect... I > had a used cdi and put it on the bike now it runs fine but I don't > trust it because it too is oem stock from 84 out of a parts bike. The > manual does not show a way to check the cdi to see if it is bad. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to nighthawk_lovers@googlegroups.com. To unsubscribe from this group, send email to nighthawk_lovers+unsubscr...@googlegroups.com. Visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en-US.