ALL metals corrode, because all metals will oxidize. Water is a very good
oxidizer.

Not all oxidation is bad. Anodizing, for instance, is good oxidation and
used to protect aluminum surfaces.

Kurt
On Apr 5, 2013 12:51 PM, "Pastor Ron" <pastor...@cox.net> wrote:

> I’m not buying the soapy water causes corrosion. They are aluminum wheels.
> Aluminum is non-ferrous… no metal to rust or corrode.  There was a big
> discussion on the ST page about water getting into the valve stems and
> freezing.  But the consensus was  it all seemed a bit far fetched. ****
>
> ** **
>
> *From:* nighthawk_lovers@googlegroups.com [mailto:
> nighthawk_lovers@googlegroups.com] *On Behalf Of *Allen Thomas
> *Sent:* Friday, April 05, 2013 11:07 AM
> *To:* Nighthawk Motorcycle Lovers!
> *Subject:* Re: [Nighthawk Lovers] Re: Window shopping****
>
> ** **
>
> Bead breaker.
>
> http://www.webbikeworld.com/t2/bead-breaker/motorcycle-tire-bead-breaker.htm
> ****
>
> bolt cutter or hacksaw on the bead after slicing off the tread.****
>
> ** **
>
> using lashing straps to mount a tire.
> http://www.advrider.com/forums/showthread.php?t=299597****
>
> I've got tire lube already. Soapy water I have read can corrode the
> aluminum rim. Besides the mounting lube was cheap.****
>
> ** **
>
> ** **
>
> On Fri, Apr 5, 2013 at 11:15 AM, Pastor Ron <pastor...@cox.net> wrote:****
>
> I've changed a number of them, and never used a knife. And don't know if
> that would even work to cut the wire bans down along the rim.  I have found
> the bead can be broke easy enough with my 200 lbs on top of a plank to the
> rim. (However since I changed my own, I never put a sealant in the tire.
> That may be more difficult.) The thing to be really careful about is the
> rim
> itself that you do not damage it.  The secret to stretching it over the rim
> when taking the back side off, is to get the tire in the center of the rim,
> where there is more room for it to slip over.  Also make sure you put the
> new one on in the right direction use soapy water for lubricant.****
>
> Ron
>
> -----Original Message-----
> From: nighthawk_lovers@googlegroups.com
> [mailto:nighthawk_lovers@googlegroups.com] On Behalf Of surfswab****
>
> Sent: Friday, April 05, 2013 9:27 AM
> To: Nighthawk Motorcycle Lovers!****
>
> Subject: [Nighthawk Lovers] Re: Window shopping
>
> Rather than them adopting a punitive stance toward the bargain shopper,
> they'd be a lot more successful applying some enterprising capitalism.
>
> How 'bout if the sign read:
>
> "Tires mounted $36.  Free mounting if you bring in your wheels and buy from
> us."
>
> Let the consumer decide which is the better deal.  No need to mention
> "discouraging" a certain class of buyer.  No need to mention the lack of in
> stock brands, and no need to mention they'll probly get their +
> $20 from markup on the tires.
>
> l would have at least stuck around to hear the fine print of that deal.
>
>
>
> On Apr 5, 9:10 am, "Pastor Ron" <pastor...@cox.net> wrote:
> > I don't know why I can't let this go. $72 is still not that bad.
> > Their point of charging the extra $20, I take that as a smack down.
> > It's meant to punish and insult you for being concerned about the $.
> > They certainly have a right to be paid for their services, but insults
> > are not the way to inspire loyal customers.
> >
> > However if they had that tire I wanted in stock, that would be a
> > different thing. Because I would be willing to pay for the
> > convenience.  That's the way it used to be! But now they want the
> > prices/profits/charges of the old days, without supplying the service
> > or convenience.    I've been to my Honda dealer here a number of times
> > and they do not have even the basic of parts or metric screws.  The
> > screw store down the street has more metrics than they do.   I would
> > have been willing to pay much more than internet prices if they just had
> the blasted thing in stock so I could get the bike running.
> > The whole dealer thing is messed up IMHO.
> > Ron
> >
> > From: nighthawk_lovers@googlegroups.com
> > [mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Joey Kelley
> > Sent: Friday, April 05, 2013 7:25 AM
> > To: nighthawk_lovers@googlegroups.com
> > Subject: Re: [Nighthawk Lovers] Re: Window shopping
> >
> > Ron,
> >          Sorry - $36 X 2 = $72 - not $92 / hour - but your point is
> valid.
> >          I think that shops today are trying very hard not to become
> > boutiques that show things but never sell things - in the case of
> > helmets and other gear - or places that just install things with no
> > margin on the parts. Unfortunately - I think that this is just bucking
> > a trend. Small shops are going to have to start selling parts on
> > either 0 or close to it margin to compete with direct purchasing
> > warehouses. Otherwise, they will be in the position of being
> > significantly higher priced than say a dealer that works through their
> > manufacturer's discount plans. As a result, people will start to go
> elsewhere.
> >          Thats just my 2 cents!
> >            -Joey
> >
> > On Fri, Apr 5, 2013 at 7:32 AM, Pastor Ron <pastor...@cox.net> wrote:
> >
> >    Price board said "Tires mounted $36 (+$20 if you supply the tire)"
> >
> > It's a half hour job. That's $92 / hour.  But that is not enough money
> > for us so we'll slap on another 20 buck fee.  Suppose Eye Masters
> > said, since you did not get your prescription here, there is a $20 fee?
> > Ron
> >
> >
> >
> >
> >
> >
> >
> > -----Original Message-----
> > From: nighthawk_lovers@googlegroups.com
> >
> > [mailto:nighthawk_lovers@googlegroups.com] On Behalf Of Allen Thomas
> > Sent: Friday, April 05, 2013 6:07 AM
> > To: Nightwawk Lovers
> > Subject: Re: [Nighthawk Lovers] Re: Window shopping
> >
> > You'd probably know better than me but weren't the hondamatics small
> > bikes (less than 500 CC) ?
> > Sent via BlackBerry by AT&T
> >
> > -----Original Message-----
> > From: surfswab <surfs...@gmail.com>
> > Sender: nighthawk_lovers@googlegroups.com
> > Date: Fri, 5 Apr 2013 01:56:01
> > To: Nighthawk Motorcycle Lovers!<nighthawk_lovers@googlegroups.com>
> > Reply-To: nighthawk_lovers@googlegroups.com
> > Subject: [Nighthawk Lovers] Re: Window shopping
> >
> > I suspect that was Honda's nod to the 55 mph speed limit in the U.S.
> > back in the day.  My '82 GL1100 has one of those 80 mph speedos and I
> > can assure you it will go much faster.
> >
> > The Hondamatics will get there and beyond too, but they had a rep for
> > taking a long time to do it (not much on acceleration).
> >
> > On Apr 5, 4:16 am, John Stewart <john-stewar...@hotmail.co.uk> wrote:
> > > I thought it would be faster than that I have never seen one before
> > > as they didn't sell them in This country
> >
> > > Sent from my iPhone
> >
> > > On 5 Apr 2013, at 01:33, "Allen Thomas" <althomas...@gmail.com> wrote:
> >
> > > > I'm sure the bike goes faster than 80.
> > > > Sent via BlackBerry by AT&T
> >
> > > > -----Original Message-----
> > > > From: John Stewart <john-stewar...@hotmail.co.uk>
> > > > Sender: nighthawk_lovers@googlegroups.com
> > > > Date: Thu, 4 Apr 2013 23:27:53
> > > > To:
> > > > nighthawk_lovers@googlegroups.com<nighthawk_lov...@googlegroups.co
> > > > m>
> > > > Reply-To: nighthawk_lovers@googlegroups.com
> > > > Subject: Re: [Nighthawk Lovers] Window shopping
> >
> > > > I have no trouble getting tyres for my cb700sc over here in
> > > > Ireland . I was offered a cb750a nighthawk hondamatic tonight the
> > > > speedo only goes up to 80 mph top speed is that normal it seems
> > > > very slow
> >
> > > > Sent from my iPhone
> >
> > > > On 4 Apr 2013, at 23:23, "Pastor Ron" <pastor...@cox.net> wrote:
> >
> > > >> They have to make their money however they can. I wonder if it
> > > >> discourages internet buyers or just gives them a bad rep.  I have
> > > >> changed all of the tires myself on the Nighthawk.  Not sure how
> > > >> that will work on the ST.  I may just buy a tire changer and
> > > >> offer to
> > help other guys.
> > > >> Ron
> >
> > > >> -----Original Message-----
> > > >> From: nighthawk_lovers@googlegroups.com
> > > >> [mailto:nighthawk_lovers@googlegroups.com] On Behalf Of surfswab
> > > >> Sent: Thursday, April 04, 2013 1:09 PM
> > > >> To: Nighthawk Motorcycle Lovers!
> > > >> Subject: [Nighthawk Lovers] Window shopping
> >
> > > >> Stopped at a hole-in-the-wall Yamasuki shop while running errands
> > > >> to see if they offered a tire-mounting service.
> >
> > > >> Price board said "Tires mounted $36 (+$20 if you supply the tire)"
> >
> > > >> "Why the extra twenty bucks," I ask.
> >
> > > >> "We sell tires, so we do that to discourage internet buyers."
> >
> > > >> "Do you stock Dunlop 491s for Goldwings and Avon Roadriders for a
> > > >> Nighhawk 750?"
> >
> > > >> "No, just Michelins and Shenkos, but we can order yours."
> >
> > > >> "Where would you order them?"
> >
> > > >> "Off the internet."
> >
> > > >> (Exit stage left, stunned by the logic (!)
> >
> > > >> --
> > > >> You received this message because you are subscribed to the
> > > >>Google Groups  "Nighthawk Motorcycle Lovers!" group.
> > > >> To unsubscribe from this group and stop receiving emails from it,
> > > >>send an  email to nighthawk_lovers+unsubscr...@googlegroups.com
> > <mailto:nighthawk_lovers%2bunsubscr...@googlegroups.com> .
> > > >> To post to this group, send email to
> nighthawk_lovers@googlegroups.com.
> > > >> Visit this group at
> > > >>http://groups.google.com/group/nighthawk_lovers?hl=en-US.
> > > >> For more options, visithttps://groups.google.com/groups/opt_out.
> >
> > > >> --
> > > >> You received this message because you are subscribed to the
> > > >> Google
> > Groups "Nighthawk Motorcycle Lovers!" group.
> > > >> To unsubscribe from this group and stop receiving emails from it,
> > > >> send
> > an email to nighthawk_lovers+unsubscr...@googlegroups.com
> > <mailto:nighthawk_lovers%2bunsubscr...@googlegroups.com> .
> > > >> To post to this group, send email to
> nighthawk_lovers@googlegroups.com.
> > > >> Visit this group
> > athttp://groups.google.com/group/nighthawk_lovers?hl=en-US.
> > > >> For more options, visithttps://groups.google.com/groups/opt_out.
> >
> > > > --
> > > > You received this message because you are subscribed to the Google
> > Groups "Nighthawk Motorcycle Lovers!" group.
> > > > To unsubscribe from this group and stop receiving emails from it,
> > > > send
> > an email to nighthawk_lovers+unsubscr...@googlegroups.com
> > <mailto:nighthawk_lovers%2bunsubscr...@googlegroups.com> .
> > > > To post to this group, send email to
> nighthawk_lovers@googlegroups.com.
> > > > Visit this group
> > athttp://groups.google.com/group/nighthawk_lovers?hl=en-US.
> > > > For more options, visithttps://groups.google.com/groups/opt_out.
> >
> > > > --
> > > > You received this message because you are subscribed to the Google
> > Groups "Nighthawk Motorcycle Lovers!" group.
> > > > To unsubscribe from this group and stop receiving emails from it,
> > > > send
> > an email to nighthawk_lovers+unsubscr...@googlegroups.com
> > <mailto:nighthawk_lovers%2bunsubscr...@googlegroups.com> .
> > > > To post to this group, send email to
> nighthawk_lovers@googlegroups.com.
> > > > Visit this group
> > athttp://groups.google.com/group/nighthawk_lovers?hl=en-US.
> > > > For more options, visithttps://groups.google.com/groups/opt_out.
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "Nighthawk Motorcycle Lovers!" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> > an email to nighthawk_lovers+unsubscr...@googlegroups.com
> > <mailto:nighthawk_lovers%2bunsubscr...@googlegroups.com> .
> > To post to this group, send email to nighthawk_lovers@googlegroups.com.
> > Visit this group
> athttp://groups.google.com/group/nighthawk_lovers?hl=en-US.
> > For more options, visithttps://groups.google.com/groups/opt_out.
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "Nighthawk Motorcycle Lovers!" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> > an email to nighthawk_lovers+unsubscr...@googlegroups.com
> > <mailto:nighthawk_lovers%2bunsubscr...@googlegroups.com> .
> > To post to this group, send email to nighthawk_lovers@googlegroups.com.
> > Visit this group
> athttp://groups.google.com/group/nighthawk_lovers?hl=en-US.
> > For more options, visithttps://groups.google.com/groups/opt_out.
> >
> > --
> > You received this message because you are subscribed to the Google
> > Groups "Nighthawk Motorcycle Lovers!" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> > an email to nighthawk_lovers+unsubscr...@googlegroups.com
> > <mailto:nighthawk_lovers%2bunsubscr...@googlegroups.com> .
> > To post to this group, send email to nighthawk_lovers@googlegroups.com.
> > Visit this group
> athttp://groups.google.com/group/nighthawk_lovers?hl=en-US.
> > For more options, visithttps://groups.google.com/groups/opt_out.
> >
> > --
> > -Joey Kelley
> > JoeyKelley.com - My Life Online
> > JoeyFixesComputers.com - Its What I Do!
> > JoeyKelleyPhoto.com - Photographing Today, For Tomorrow
> > --
> > You received this message because you are subscribed to the Google
> > Groups "Nighthawk Motorcycle Lovers!" group.
> > To unsubscribe from this group and stop receiving emails from it, send
> > an email to nighthawk_lovers+unsubscr...@googlegroups.com.
> > To post to this group, send email to nighthawk_lovers@googlegroups.com.
> > Visit this group at
> >
> > ...
> >
> > read more »
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en-US.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en-US.
> For more options, visit https://groups.google.com/groups/opt_out.
> **
> ******
>
> ** **
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en-US.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>  ****
>
> --
> You received this message because you are subscribed to the Google Groups
> "Nighthawk Motorcycle Lovers!" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to nighthawk_lovers+unsubscr...@googlegroups.com.
> To post to this group, send email to nighthawk_lovers@googlegroups.com.
> Visit this group at
> http://groups.google.com/group/nighthawk_lovers?hl=en-US.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To post to this group, send email to nighthawk_lovers@googlegroups.com.
Visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en-US.
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to