So is the engine turning or nothing but the clicking noise? Did you mess with anything electrical? BTW, Welcome to the group!
Javier. On Tue, May 21, 2013 at 7:58 PM, <baronn...@gmail.com> wrote: > Hello, everyone! > > Today I decided to try and clean my 1996 Nighthawk CB250's carburetor, > despite the fact that I have very little mechanical experience. I also > decided to do this completely blind and not look up instructions on the > internet beforehand, so I just started taking things apart. > > Long story short, I took apart a lot of things I probably didn't need to, > and now the bike won't start. When I press the ignition button, it gives a > clicking noise from under the seat, and trying to push start the bike only > results in the rear wheel locking up and skidding, though the rear wheel > moves freely when in neutral or with the clutch pulled in. Any ideas as to > what I did wrong and if I can fix it? > > Thanks! > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to nighthawk_lovers+unsubscr...@googlegroups.com. > To post to this group, send email to nighthawk_lovers@googlegroups.com. > Visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en-US. > For more options, visit https://groups.google.com/groups/opt_out. > > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en-US. For more options, visit https://groups.google.com/groups/opt_out.
