They are shims and thrust washers. As long as you put all the washer back in you should be good there. The armature would have a endplay issue without them installed and shorten the life of the starter but not so great in my opinion to make it miss the clutch gear. Sent from my iPhone
> On May 14, 2015, at 10:10 PM, Raymond Gomez <sirray...@gmail.com> wrote: > > nope dont have one and none fell off when the starter was removed. all that > came out was the starter. waiting for my photos to sync then i will show you > > >> On Thursday, May 14, 2015 at 10:02:32 PM UTC-4, Tommy Hill wrote: >> On my 700S the final starter gear can go on either way. It fell right off. I >> don't see one in your schematic, but if you have one and can flip it, try >> that. > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to nighthawk_lovers+unsubscr...@googlegroups.com. > To post to this group, send email to nighthawk_lovers@googlegroups.com. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
