Hello Everyone, Hopefully I can obtain some more knowledge from this group to help determine my issue I am having.
Some info: -2000 Honda Nighthawk 750 with 20,500 miles -Battery is brand new (purchased a 2 months ago). -Starter Solenoid went bad about a month ago. Ordered a new one, replace it and NH fired right up. I was riding just about daily since replacing the solenoid.This past Sunday, I was going to out for a ride and when starting, it was sluggish and decided to help it by throttling a bit to get going. When that happened, sounded like the starter solenoid went again. Clicking sound near battery, pulled seat and confirmed it was coming from the starter solenoid again. Without thinking, pulled it, checked the fuse in it, and ordered a new one not to waste any time. (only $5) Part received today, installed it and still getting clicking sound. Things I checked: -Battery fully charged (check via meter - also had it on trickle charge since Sunday) -Battery does not lose it amps when trying to start the NH One thing I noticed, if the kill switch is either in “Off/Run”, the starter solenoid makes the clicking sound when attempting to start the bike. Is the switch faulty? Thank you in advance for your time and assistance! -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
