It should be around 10 to 15lbs.
Sent from my Verizon 4G LTE smartphone -------- Original message -------- From: Tommy Hill <ominbo...@gmail.com> Date: 1/6/17 7:51 AM (GMT-05:00) To: Nighthawk Motorcycle Lovers! <nighthawk_lovers@googlegroups.com> Subject: [Nighthawk Lovers] 83 cb650sc Ray, The size is the metric one, from your set, that fits. 6mm is a popular size for these bikes. I looked in the manual and cannot find a torque setting. For me, this means try and approximate the torque required to remove. German torque would likely apply here. (Gutentight). Remember, you can always tighten more if there are leaks, not so if you over tighten and break something. Since I have a 700S also, I am scared as hell about wrong length of bolts. So..take out and replace from/to the exact same hole. Gasket seal seems to be the preference. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To post to this group, send email to nighthawk_lovers@googlegroups.com. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.