I'm in New York, but the only kits that I've found online look like they won't fit. The seal under the selector is 28mm, while all the ones i've seen on ebay were 24mm and also have an extra hole in the center while the cb700sc's doesn't have a hole? I already have the vacuum side rebuild kit but I wanted to do both the selector knob and the vacuum. I don't mind spending the 30 bucks or whatever it comes out to, to get the right part.
On Sunday, November 21, 2021 at 1:03:12 AM UTC-5 wrench...@gmail.com wrote: > Sure, are you in the UK? > > That looked like a UK kit. > Yes, that's the fuel side only, there's also a vacuum diaphragm with an > integrated weight for the supply half of the petcock on some bikes. So the > complete kits you find on Ebay are fine as well. These are common parts for > bikes that are easy to replace so kits are plentiful. > > Careful not to rip the rubber diaphragm if you find one inside, they need > to be whole and unruptured. > > On Sun, Nov 21, 2021 at 8:40 AM Peter N <pni...@gmail.com> wrote: > >> >> Well, I found this kit. Supposedly it's the complete kit. >> >> >> http://www.nrp-carbs.co.uk/shop/index.php?route=product/product&product_id=4470 >> On Saturday, November 20, 2021 at 6:52:54 PM UTC-5 wrench...@gmail.com >> wrote: >> >>> They were the same for all honda's of that year I think. Go to Partzilla >>> and look up the part number of the kit. >>> >>> I recommend you buy the replacement petcock kits online, J & L or Parts >>> Unlimited are fine. >>> >>> Good Luck >>> >>> >>> On Sat, Nov 20, 2021 at 11:54 PM Peter Nisita <pni...@gmail.com> wrote: >>> >>>> I just bought this bike and its been sitting for a long time. I want to >>>> rebuild the selector of the petcock while I have it out, but can't find >>>> the >>>> right rebuild kit that will work. I know that I'll have to drill out the >>>> rivets and tap threads. Can someone point me in the direction of the >>>> correct rebuild kit? I found an old conversation here about it, but the >>>> links all pointed to out of stock parts. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Nighthawk Motorcycle Lovers!" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to nighthawk_love...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/nighthawk_lovers/3f3cb613-e854-4d9d-a1a5-05b78ff7a2d4n%40googlegroups.com >>>> >>>> <https://groups.google.com/d/msgid/nighthawk_lovers/3f3cb613-e854-4d9d-a1a5-05b78ff7a2d4n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "Nighthawk Motorcycle Lovers!" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to nighthawk_love...@googlegroups.com. >> > To view this discussion on the web visit >> https://groups.google.com/d/msgid/nighthawk_lovers/eaa7986b-c603-45fd-b0cd-d46573a19dcan%40googlegroups.com >> >> <https://groups.google.com/d/msgid/nighthawk_lovers/eaa7986b-c603-45fd-b0cd-d46573a19dcan%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to nighthawk_lovers+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/nighthawk_lovers/ca7306fd-8aa7-4cc9-bc49-6a9f283c2285n%40googlegroups.com.
