I've never made spark plug wires myself so forgive my ignorance, but do I 
just shove the wire into the coil and screw the cap on? There's no special 
type of wire end that's used for these coils? I was looking at the wire and 
it has a hole in it.. That's just created by the coil then?

On Wednesday, December 8, 2021 at 2:08:14 AM UTC-5 wrench...@gmail.com 
wrote:

> Yep, those are standard plug wires. You do need to figure out the 
> resistance above and below that connector, it may have a resistor inside, 
> but once you figure that out, you just replace that wire.
>
> You can buy all four and replace all of them or just the one. 
> Research the year and model and the plug wire's resistance rating.
>
>
> On Wed, Dec 8, 2021 at 1:39 PM Peter N <pni...@gmail.com> wrote:
>
>> [image: 2021-12-08 00_28_42-IMG_20211208_001119.jpg ‎- Photos.png][image: 
>> 2021-12-08 00_29_03-IMG_20211208_001058.jpg ‎- Photos.png]So I was 
>> taking everything off to do the valve cover gasket and drain the tank and 
>> one of the wires broke off. The previous owner had electrical tape wrapped 
>> around it so I assume it was already broken. What are my options? I would 
>> like to replace all four wires. Are there kits that come with the ends that 
>> plug into the coils directly? 
>>
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Nighthawk Motorcycle Lovers!" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to nighthawk_love...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/nighthawk_lovers/e6fdaff2-c6cc-418a-b79e-3b31bf77efcfn%40googlegroups.com
>>  
>> <https://groups.google.com/d/msgid/nighthawk_lovers/e6fdaff2-c6cc-418a-b79e-3b31bf77efcfn%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to nighthawk_lovers+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/nighthawk_lovers/c04c96f9-c5a6-4c61-a27e-c23494a595aen%40googlegroups.com.

Reply via email to