> I just recently purchased an MD-2 > motordrive combined with an MB-1 battery > holder. The question I have is how do > you get the battery compartment out to > load the batteries? Pull the outer edge of the battery holder towards you a bit, and then pull it out to the side. > Also, do the drive and the camera have > to be set at same shutter speed to work? The motor drive can be set to any speed equal to or lower than the camera's shutter speed. If you set it the motor faster than the camera it'll try to wind the film during the exposure, which is not a good thing. In other words: motor@125 + camera@500 = OK motor@125 + camera@125 = OK motor@125 + camera@30 = Crunchy Noises -Don