Dear Nixers, I've a slightly off-topic question but since I know there are some excellent Unix networking experts on this list I hope to get a pointer in the right direction.
After some changes in my networking setup (I added an IP address to my eth0 interface) my strongswan VPN service fails to add a route to my routing table (it used to work before): installing route: 10.180.0.0/24 via 136.243.17.1 src 172.16.48.17 dev eth0 received netlink error: Network is unreachable (101) If I manually try to add the route I get the same error message: # ip route add 10.180.0.0/24 via 136.243.17.1 src 172.16.48.17 dev eth0 RTNETLINK answers: Network is unreachable I've asked[1] the same question on the strongswan mailing list but haven't found a solution yet. My network settings are fairly simple (note I'm deploying my machine using nixops to Hetzner): deployment = { targetEnv = "hetzner"; hetzner = { mainIPv4 = "136.243.17.41"; ... }; }; networking = { enableIPv6 = false; useDHCP = false; interfaces.eth0.ip4 = [ { address = "136.243.25.125"; prefixLength = 32; } { address = "136.243.25.108"; prefixLength = 32; } { address = "172.16.48.17"; prefixLength = 28; } ]; firewall = { enable = true; allowPing = true; allowedTCPPorts = [ ... ]; } }; Any idea why I can't add that route? Regards, Bas [1] https://lists.strongswan.org/pipermail/users/2015-April/007935.html _______________________________________________ nix-dev mailing list nix-dev@lists.science.uu.nl http://lists.science.uu.nl/mailman/listinfo/nix-dev