github-actions[bot] commented on PR #5751: URL: https://github.com/apache/texera/pull/5751#issuecomment-4786276919
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 3 worse · ⚪ 10 noise (<±5%) · 0 without baseline > Compared against main `1c580e5` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/28077835125) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 385 | 0.235 | 25,139/31,427/31,427 us | 🟢 -8.0% / 🟢 -10.2% | | 🔴 | bs=100 sw=10 sl=64 | 799 | 0.488 | 122,151/157,858/157,858 us | 🔴 +5.6% / 🔴 +12.9% | | ⚪ | bs=1000 sw=10 sl=64 | 928 | 0.566 | 1,077,487/1,128,224/1,128,224 us | ⚪ within ±5% / 🔴 -10.9% | <details><summary>Baseline details</summary> Latest main `1c580e5` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 385 tuples/sec | 402 tuples/sec | 410.82 tuples/sec | -4.2% | -6.3% | | bs=10 sw=10 sl=64 | MB/s | 0.235 MB/s | 0.246 MB/s | 0.251 MB/s | -4.5% | -6.3% | | bs=10 sw=10 sl=64 | p50 | 25,139 us | 23,528 us | 23,785 us | +6.8% | +5.7% | | bs=10 sw=10 sl=64 | p95 | 31,427 us | 34,160 us | 34,980 us | -8.0% | -10.2% | | bs=10 sw=10 sl=64 | p99 | 31,427 us | 34,160 us | 34,980 us | -8.0% | -10.2% | | bs=100 sw=10 sl=64 | throughput | 799 tuples/sec | 823 tuples/sec | 891.94 tuples/sec | -2.9% | -10.4% | | bs=100 sw=10 sl=64 | MB/s | 0.488 MB/s | 0.502 MB/s | 0.544 MB/s | -2.8% | -10.4% | | bs=100 sw=10 sl=64 | p50 | 122,151 us | 119,101 us | 112,277 us | +2.6% | +8.8% | | bs=100 sw=10 sl=64 | p95 | 157,858 us | 149,492 us | 139,802 us | +5.6% | +12.9% | | bs=100 sw=10 sl=64 | p99 | 157,858 us | 149,492 us | 139,802 us | +5.6% | +12.9% | | bs=1000 sw=10 sl=64 | throughput | 928 tuples/sec | 937 tuples/sec | 1,041 tuples/sec | -1.0% | -10.9% | | bs=1000 sw=10 sl=64 | MB/s | 0.566 MB/s | 0.572 MB/s | 0.635 MB/s | -1.0% | -10.9% | | bs=1000 sw=10 sl=64 | p50 | 1,077,487 us | 1,065,684 us | 972,714 us | +1.1% | +10.8% | | bs=1000 sw=10 sl=64 | p95 | 1,128,224 us | 1,107,788 us | 1,023,057 us | +1.8% | +10.3% | | bs=1000 sw=10 sl=64 | p99 | 1,128,224 us | 1,107,788 us | 1,023,057 us | +1.8% | +10.3% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,519.03,200,128000,385,0.235,25138.52,31426.93,31426.93 1,100,10,64,20,2502.14,2000,1280000,799,0.488,122150.78,157858.47,157858.47 2,1000,10,64,20,21552.44,20000,12800000,928,0.566,1077487.28,1128224.11,1128224.11 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
