github-actions[bot] commented on PR #5940: URL: https://github.com/apache/texera/pull/5940#issuecomment-4793470584
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 3 worse · ⚪ 12 noise (<±5%) · 0 without baseline > Compared against main `e55d1ab` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/28128164175) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 360 | 0.22 | 25,622/38,664/38,664 us | 🔴 +15.3% / 🔴 +158.5% | | ⚪ | bs=100 sw=10 sl=64 | 766 | 0.467 | 126,861/166,098/166,098 us | ⚪ within ±5% / 🔴 +65.7% | | ⚪ | bs=1000 sw=10 sl=64 | 923 | 0.563 | 1,083,048/1,132,920/1,132,920 us | ⚪ within ±5% / 🔴 +20.4% | <details><summary>Baseline details</summary> Latest main `e55d1ab` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 360 tuples/sec | 393 tuples/sec | 799.7 tuples/sec | -8.4% | -55.0% | | bs=10 sw=10 sl=64 | MB/s | 0.22 MB/s | 0.24 MB/s | 0.488 MB/s | -8.3% | -54.9% | | bs=10 sw=10 sl=64 | p50 | 25,622 us | 22,219 us | 12,125 us | +15.3% | +111.3% | | bs=10 sw=10 sl=64 | p95 | 38,664 us | 39,189 us | 14,959 us | -1.3% | +158.5% | | bs=10 sw=10 sl=64 | p99 | 38,664 us | 39,189 us | 18,503 us | -1.3% | +109.0% | | bs=100 sw=10 sl=64 | throughput | 766 tuples/sec | 800 tuples/sec | 1,069 tuples/sec | -4.3% | -28.3% | | bs=100 sw=10 sl=64 | MB/s | 0.467 MB/s | 0.489 MB/s | 0.652 MB/s | -4.5% | -28.4% | | bs=100 sw=10 sl=64 | p50 | 126,861 us | 122,251 us | 92,709 us | +3.8% | +36.8% | | bs=100 sw=10 sl=64 | p95 | 166,098 us | 163,948 us | 100,227 us | +1.3% | +65.7% | | bs=100 sw=10 sl=64 | p99 | 166,098 us | 163,948 us | 109,877 us | +1.3% | +51.2% | | bs=1000 sw=10 sl=64 | throughput | 923 tuples/sec | 914 tuples/sec | 1,114 tuples/sec | +1.0% | -17.1% | | bs=1000 sw=10 sl=64 | MB/s | 0.563 MB/s | 0.558 MB/s | 0.68 MB/s | +0.9% | -17.2% | | bs=1000 sw=10 sl=64 | p50 | 1,083,048 us | 1,092,741 us | 899,197 us | -0.9% | +20.4% | | bs=1000 sw=10 sl=64 | p95 | 1,132,920 us | 1,160,918 us | 945,162 us | -2.4% | +19.9% | | bs=1000 sw=10 sl=64 | p99 | 1,132,920 us | 1,160,918 us | 986,231 us | -2.4% | +14.9% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,555.06,200,128000,360,0.220,25622.49,38664.39,38664.39 1,100,10,64,20,2611.20,2000,1280000,766,0.467,126860.95,166097.69,166097.69 2,1000,10,64,20,21669.72,20000,12800000,923,0.563,1083048.13,1132919.95,1132919.95 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
