github-actions[bot] commented on PR #6022: URL: https://github.com/apache/texera/pull/6022#issuecomment-4829118367
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 4 worse · ⚪ 9 noise (<±5%) · 0 without baseline > Compared against main `16a3ddf` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/28349379473) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 390 | 0.238 | 24,041/35,859/35,859 us | 🔴 +14.3% / 🔴 +133.9% | | 🟢 | bs=100 sw=10 sl=64 | 827 | 0.505 | 119,589/144,208/144,208 us | 🟢 -8.8% / 🔴 +30.4% | | ⚪ | bs=1000 sw=10 sl=64 | 926 | 0.565 | 1,079,805/1,135,503/1,135,503 us | ⚪ within ±5% / 🔴 +6.7% | <details><summary>Baseline details</summary> Latest main `16a3ddf` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 390 tuples/sec | 426 tuples/sec | 757.16 tuples/sec | -8.5% | -48.5% | | bs=10 sw=10 sl=64 | MB/s | 0.238 MB/s | 0.26 MB/s | 0.462 MB/s | -8.5% | -48.5% | | bs=10 sw=10 sl=64 | p50 | 24,041 us | 24,224 us | 12,971 us | -0.8% | +85.3% | | bs=10 sw=10 sl=64 | p95 | 35,859 us | 31,361 us | 15,333 us | +14.3% | +133.9% | | bs=10 sw=10 sl=64 | p99 | 35,859 us | 31,361 us | 18,732 us | +14.3% | +91.4% | | bs=100 sw=10 sl=64 | throughput | 827 tuples/sec | 831 tuples/sec | 957.66 tuples/sec | -0.5% | -13.6% | | bs=100 sw=10 sl=64 | MB/s | 0.505 MB/s | 0.507 MB/s | 0.585 MB/s | -0.4% | -13.6% | | bs=100 sw=10 sl=64 | p50 | 119,589 us | 118,475 us | 103,982 us | +0.9% | +15.0% | | bs=100 sw=10 sl=64 | p95 | 144,208 us | 158,050 us | 110,583 us | -8.8% | +30.4% | | bs=100 sw=10 sl=64 | p99 | 144,208 us | 158,050 us | 118,369 us | -8.8% | +21.8% | | bs=1000 sw=10 sl=64 | throughput | 926 tuples/sec | 937 tuples/sec | 979.6 tuples/sec | -1.2% | -5.5% | | bs=1000 sw=10 sl=64 | MB/s | 0.565 MB/s | 0.572 MB/s | 0.598 MB/s | -1.2% | -5.5% | | bs=1000 sw=10 sl=64 | p50 | 1,079,805 us | 1,062,296 us | 1,024,553 us | +1.6% | +5.4% | | bs=1000 sw=10 sl=64 | p95 | 1,135,503 us | 1,097,686 us | 1,063,789 us | +3.4% | +6.7% | | bs=1000 sw=10 sl=64 | p99 | 1,135,503 us | 1,097,686 us | 1,096,239 us | +3.4% | +3.6% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,512.85,200,128000,390,0.238,24041.20,35859.32,35859.32 1,100,10,64,20,2418.20,2000,1280000,827,0.505,119589.18,144208.23,144208.23 2,1000,10,64,20,21602.97,20000,12800000,926,0.565,1079804.90,1135503.31,1135503.31 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
