github-actions[bot] commented on PR #6184: URL: https://github.com/apache/texera/pull/6184#issuecomment-4886979426
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 5 worse · ⚪ 8 noise (<±5%) · 0 without baseline > Compared against main `6e25ffb` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/28748904264) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 372 | 0.227 | 27,219/37,009/37,009 us | 🔴 +21.2% / 🔴 +143.2% | | 🟢 | bs=100 sw=10 sl=64 | 815 | 0.497 | 121,675/133,942/133,942 us | 🟢 -5.5% / 🔴 +24.1% | | ⚪ | bs=1000 sw=10 sl=64 | 935 | 0.57 | 1,074,683/1,099,403/1,099,403 us | ⚪ within ±5% / 🔴 +9.0% | <details><summary>Baseline details</summary> Latest main `6e25ffb` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 372 tuples/sec | 423 tuples/sec | 777.63 tuples/sec | -12.1% | -52.2% | | bs=10 sw=10 sl=64 | MB/s | 0.227 MB/s | 0.258 MB/s | 0.475 MB/s | -12.0% | -52.2% | | bs=10 sw=10 sl=64 | p50 | 27,219 us | 22,455 us | 12,603 us | +21.2% | +116.0% | | bs=10 sw=10 sl=64 | p95 | 37,009 us | 33,491 us | 15,215 us | +10.5% | +143.2% | | bs=10 sw=10 sl=64 | p99 | 37,009 us | 33,491 us | 18,617 us | +10.5% | +98.8% | | bs=100 sw=10 sl=64 | throughput | 815 tuples/sec | 821 tuples/sec | 987.11 tuples/sec | -0.7% | -17.4% | | bs=100 sw=10 sl=64 | MB/s | 0.497 MB/s | 0.501 MB/s | 0.602 MB/s | -0.8% | -17.5% | | bs=100 sw=10 sl=64 | p50 | 121,675 us | 120,455 us | 101,428 us | +1.0% | +20.0% | | bs=100 sw=10 sl=64 | p95 | 133,942 us | 141,806 us | 107,959 us | -5.5% | +24.1% | | bs=100 sw=10 sl=64 | p99 | 133,942 us | 141,806 us | 114,777 us | -5.5% | +16.7% | | bs=1000 sw=10 sl=64 | throughput | 935 tuples/sec | 949 tuples/sec | 1,021 tuples/sec | -1.5% | -8.5% | | bs=1000 sw=10 sl=64 | MB/s | 0.57 MB/s | 0.579 MB/s | 0.623 MB/s | -1.6% | -8.6% | | bs=1000 sw=10 sl=64 | p50 | 1,074,683 us | 1,052,915 us | 986,363 us | +2.1% | +9.0% | | bs=1000 sw=10 sl=64 | p95 | 1,099,403 us | 1,079,198 us | 1,026,594 us | +1.9% | +7.1% | | bs=1000 sw=10 sl=64 | p99 | 1,099,403 us | 1,079,198 us | 1,054,559 us | +1.9% | +4.3% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,537.80,200,128000,372,0.227,27219.02,37009.06,37009.06 1,100,10,64,20,2454.30,2000,1280000,815,0.497,121675.40,133942.27,133942.27 2,1000,10,64,20,21400.21,20000,12800000,935,0.570,1074683.32,1099403.22,1099403.22 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
