github-actions[bot] commented on PR #7264: URL: https://github.com/apache/texera/pull/7264#issuecomment-5161075304
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 0 better · 🔴 4 worse · ⚪ 11 noise (<±5%) · 0 without baseline > Compared against main `3dcd82b` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/30774026778) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | ⚪ | bs=10 sw=10 sl=64 | 402 | 0.245 | 23,402/33,869/33,869 us | ⚪ within ±5% / 🔴 +120.1% | | 🔴 | bs=100 sw=10 sl=64 | 782 | 0.477 | 124,509/169,220/169,220 us | 🔴 +20.8% / 🔴 +59.8% | | ⚪ | bs=1000 sw=10 sl=64 | 923 | 0.564 | 1,079,699/1,151,546/1,151,546 us | ⚪ within ±5% / 🔴 +13.3% | <details><summary>Baseline details</summary> Latest main `3dcd82b` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 402 tuples/sec | 414 tuples/sec | 790.88 tuples/sec | -2.9% | -49.2% | | bs=10 sw=10 sl=64 | MB/s | 0.245 MB/s | 0.253 MB/s | 0.483 MB/s | -3.2% | -49.2% | | bs=10 sw=10 sl=64 | p50 | 23,402 us | 24,182 us | 12,348 us | -3.2% | +89.5% | | bs=10 sw=10 sl=64 | p95 | 33,869 us | 32,607 us | 15,390 us | +3.9% | +120.1% | | bs=10 sw=10 sl=64 | p99 | 33,869 us | 32,607 us | 18,935 us | +3.9% | +78.9% | | bs=100 sw=10 sl=64 | throughput | 782 tuples/sec | 833 tuples/sec | 1,009 tuples/sec | -6.1% | -22.5% | | bs=100 sw=10 sl=64 | MB/s | 0.477 MB/s | 0.509 MB/s | 0.616 MB/s | -6.3% | -22.5% | | bs=100 sw=10 sl=64 | p50 | 124,509 us | 119,649 us | 99,753 us | +4.1% | +24.8% | | bs=100 sw=10 sl=64 | p95 | 169,220 us | 140,118 us | 105,895 us | +20.8% | +59.8% | | bs=100 sw=10 sl=64 | p99 | 169,220 us | 140,118 us | 113,263 us | +20.8% | +49.4% | | bs=1000 sw=10 sl=64 | throughput | 923 tuples/sec | 922 tuples/sec | 1,037 tuples/sec | +0.1% | -11.0% | | bs=1000 sw=10 sl=64 | MB/s | 0.564 MB/s | 0.563 MB/s | 0.633 MB/s | +0.2% | -10.9% | | bs=1000 sw=10 sl=64 | p50 | 1,079,699 us | 1,091,525 us | 976,194 us | -1.1% | +10.6% | | bs=1000 sw=10 sl=64 | p95 | 1,151,546 us | 1,142,376 us | 1,016,411 us | +0.8% | +13.3% | | bs=1000 sw=10 sl=64 | p99 | 1,151,546 us | 1,142,376 us | 1,045,212 us | +0.8% | +10.2% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,497.83,200,128000,402,0.245,23402.04,33868.58,33868.58 1,100,10,64,20,2557.65,2000,1280000,782,0.477,124509.44,169220.09,169220.09 2,1000,10,64,20,21662.00,20000,12800000,923,0.564,1079698.50,1151546.28,1151546.28 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
