github-actions[bot] commented on PR #7474: URL: https://github.com/apache/texera/pull/7474#issuecomment-5233633201
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 4 better · 🔴 5 worse · ⚪ 6 noise (<±5%) · 0 without baseline > Compared against main `114a610` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/31333478449) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 413 | 0.252 | 24,144/30,027/30,027 us | 🔴 +23.6% / 🔴 +83.9% | | 🟢 | bs=100 sw=10 sl=64 | 922 | 0.563 | 106,429/132,653/132,653 us | 🟢 -16.6% / 🔴 +17.9% | | 🔴 | bs=1000 sw=10 sl=64 | 1,094 | 0.668 | 909,478/1,119,366/1,119,366 us | 🔴 +12.5% / 🟢 +12.6% | <details><summary>Baseline details</summary> Latest main `114a610` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 413 tuples/sec | 464 tuples/sec | 743.73 tuples/sec | -11.0% | -44.5% | | bs=10 sw=10 sl=64 | MB/s | 0.252 MB/s | 0.283 MB/s | 0.454 MB/s | -11.0% | -44.5% | | bs=10 sw=10 sl=64 | p50 | 24,144 us | 19,536 us | 13,130 us | +23.6% | +83.9% | | bs=10 sw=10 sl=64 | p95 | 30,027 us | 31,677 us | 16,391 us | -5.2% | +83.2% | | bs=10 sw=10 sl=64 | p99 | 30,027 us | 31,677 us | 19,408 us | -5.2% | +54.7% | | bs=100 sw=10 sl=64 | throughput | 922 tuples/sec | 944 tuples/sec | 944.04 tuples/sec | -2.3% | -2.3% | | bs=100 sw=10 sl=64 | MB/s | 0.563 MB/s | 0.576 MB/s | 0.576 MB/s | -2.3% | -2.3% | | bs=100 sw=10 sl=64 | p50 | 106,429 us | 104,068 us | 105,853 us | +2.3% | +0.5% | | bs=100 sw=10 sl=64 | p95 | 132,653 us | 159,118 us | 112,493 us | -16.6% | +17.9% | | bs=100 sw=10 sl=64 | p99 | 132,653 us | 159,118 us | 122,200 us | -16.6% | +8.6% | | bs=1000 sw=10 sl=64 | throughput | 1,094 tuples/sec | 1,107 tuples/sec | 972.22 tuples/sec | -1.2% | +12.5% | | bs=1000 sw=10 sl=64 | MB/s | 0.668 MB/s | 0.675 MB/s | 0.593 MB/s | -1.0% | +12.6% | | bs=1000 sw=10 sl=64 | p50 | 909,478 us | 897,538 us | 1,033,856 us | +1.3% | -12.0% | | bs=1000 sw=10 sl=64 | p95 | 1,119,366 us | 995,243 us | 1,076,083 us | +12.5% | +4.0% | | bs=1000 sw=10 sl=64 | p99 | 1,119,366 us | 995,243 us | 1,107,701 us | +12.5% | +1.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,484.01,200,128000,413,0.252,24143.96,30026.51,30026.51 1,100,10,64,20,2168.50,2000,1280000,922,0.563,106429.14,132652.83,132652.83 2,1000,10,64,20,18280.78,20000,12800000,1094,0.668,909478.14,1119365.54,1119365.54 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
