github-actions[bot] commented on PR #7492: URL: https://github.com/apache/texera/pull/7492#issuecomment-5235134916
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 5 better · 🔴 3 worse · ⚪ 7 noise (<±5%) · 0 without baseline > Compared against main `aa791a4` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/31348769322) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🟢 | bs=10 sw=10 sl=64 | 373 | 0.227 | 25,709/37,665/37,665 us | 🟢 -35.4% / 🔴 +129.8% | | 🔴 | bs=100 sw=10 sl=64 | 798 | 0.487 | 124,086/142,157/142,157 us | 🔴 +6.5% / 🔴 +26.4% | | 🔴 | bs=1000 sw=10 sl=64 | 939 | 0.573 | 1,064,370/1,177,074/1,177,074 us | 🔴 +5.9% / 🔴 +9.4% | <details><summary>Baseline details</summary> Latest main `aa791a4` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 373 tuples/sec | 330 tuples/sec | 743.73 tuples/sec | +13.0% | -49.8% | | bs=10 sw=10 sl=64 | MB/s | 0.227 MB/s | 0.202 MB/s | 0.454 MB/s | +12.4% | -50.0% | | bs=10 sw=10 sl=64 | p50 | 25,709 us | 28,604 us | 13,130 us | -10.1% | +95.8% | | bs=10 sw=10 sl=64 | p95 | 37,665 us | 58,271 us | 16,391 us | -35.4% | +129.8% | | bs=10 sw=10 sl=64 | p99 | 37,665 us | 58,271 us | 19,408 us | -35.4% | +94.1% | | bs=100 sw=10 sl=64 | throughput | 798 tuples/sec | 833 tuples/sec | 944.04 tuples/sec | -4.2% | -15.5% | | bs=100 sw=10 sl=64 | MB/s | 0.487 MB/s | 0.508 MB/s | 0.576 MB/s | -4.1% | -15.5% | | bs=100 sw=10 sl=64 | p50 | 124,086 us | 116,493 us | 105,853 us | +6.5% | +17.2% | | bs=100 sw=10 sl=64 | p95 | 142,157 us | 145,448 us | 112,493 us | -2.3% | +26.4% | | bs=100 sw=10 sl=64 | p99 | 142,157 us | 145,448 us | 122,200 us | -2.3% | +16.3% | | bs=1000 sw=10 sl=64 | throughput | 939 tuples/sec | 947 tuples/sec | 972.22 tuples/sec | -0.8% | -3.4% | | bs=1000 sw=10 sl=64 | MB/s | 0.573 MB/s | 0.578 MB/s | 0.593 MB/s | -0.9% | -3.4% | | bs=1000 sw=10 sl=64 | p50 | 1,064,370 us | 1,052,826 us | 1,033,856 us | +1.1% | +3.0% | | bs=1000 sw=10 sl=64 | p95 | 1,177,074 us | 1,111,230 us | 1,076,083 us | +5.9% | +9.4% | | bs=1000 sw=10 sl=64 | p99 | 1,177,074 us | 1,111,230 us | 1,107,701 us | +5.9% | +6.3% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,536.84,200,128000,373,0.227,25709.06,37665.43,37665.43 1,100,10,64,20,2506.90,2000,1280000,798,0.487,124085.91,142156.69,142156.69 2,1000,10,64,20,21309.54,20000,12800000,939,0.573,1064369.53,1177073.73,1177073.73 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
