github-actions[bot] commented on PR #7578: URL: https://github.com/apache/texera/pull/7578#issuecomment-5259303000
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 4 better · 🔴 1 worse · ⚪ 10 noise (<±5%) · 0 without baseline > Compared against main `e878df3` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/31539749076) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 556 | 0.34 | 17,181/22,792/22,792 us | 🟢 -13.9% / 🔴 +42.5% | | 🟢 | bs=100 sw=10 sl=64 | 1,165 | 0.711 | 83,645/109,045/109,045 us | 🟢 -16.6% / 🟢 -17.4% | | ⚪ | bs=1000 sw=10 sl=64 | 1,360 | 0.83 | 730,146/773,733/773,733 us | ⚪ within ±5% / 🟢 +32.0% | <details><summary>Baseline details</summary> Latest main `e878df3` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 556 tuples/sec | 576 tuples/sec | 784.3 tuples/sec | -3.5% | -29.1% | | bs=10 sw=10 sl=64 | MB/s | 0.34 MB/s | 0.352 MB/s | 0.479 MB/s | -3.4% | -29.0% | | bs=10 sw=10 sl=64 | p50 | 17,181 us | 16,051 us | 12,590 us | +7.0% | +36.5% | | bs=10 sw=10 sl=64 | p95 | 22,792 us | 26,483 us | 15,991 us | -13.9% | +42.5% | | bs=10 sw=10 sl=64 | p99 | 22,792 us | 26,483 us | 18,694 us | -13.9% | +21.9% | | bs=100 sw=10 sl=64 | throughput | 1,165 tuples/sec | 1,145 tuples/sec | 1,002 tuples/sec | +1.7% | +16.3% | | bs=100 sw=10 sl=64 | MB/s | 0.711 MB/s | 0.699 MB/s | 0.612 MB/s | +1.7% | +16.3% | | bs=100 sw=10 sl=64 | p50 | 83,645 us | 82,111 us | 101,285 us | +1.9% | -17.4% | | bs=100 sw=10 sl=64 | p95 | 109,045 us | 130,680 us | 108,068 us | -16.6% | +0.9% | | bs=100 sw=10 sl=64 | p99 | 109,045 us | 130,680 us | 118,235 us | -16.6% | -7.8% | | bs=1000 sw=10 sl=64 | throughput | 1,360 tuples/sec | 1,348 tuples/sec | 1,030 tuples/sec | +0.9% | +32.0% | | bs=1000 sw=10 sl=64 | MB/s | 0.83 MB/s | 0.823 MB/s | 0.629 MB/s | +0.9% | +32.0% | | bs=1000 sw=10 sl=64 | p50 | 730,146 us | 740,728 us | 991,882 us | -1.4% | -26.4% | | bs=1000 sw=10 sl=64 | p95 | 773,733 us | 771,902 us | 1,038,496 us | +0.2% | -25.5% | | bs=1000 sw=10 sl=64 | p99 | 773,733 us | 771,902 us | 1,068,265 us | +0.2% | -27.6% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,359.55,200,128000,556,0.340,17180.77,22791.56,22791.56 1,100,10,64,20,1717.41,2000,1280000,1165,0.711,83645.09,109044.71,109044.71 2,1000,10,64,20,14702.64,20000,12800000,1360,0.830,730146.21,773732.87,773732.87 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
