github-actions[bot] commented on PR #8688: URL: https://github.com/apache/texera/pull/8688#issuecomment-5844566644
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 4 better · 🔴 3 worse · ⚪ 8 noise (<±5%) · 0 without baseline > Compared against main `33bd07b` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/36229204175) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 383 | 0.233 | 24,993/31,659/31,659 us | 🔴 +10.6% / 🔴 +89.7% | | 🟢 | bs=100 sw=10 sl=64 | 805 | 0.491 | 124,684/136,774/136,774 us | 🟢 -5.8% / 🔴 +22.0% | | ⚪ | bs=1000 sw=10 sl=64 | 909 | 0.555 | 1,101,138/1,137,272/1,137,272 us | ⚪ within ±5% / 🔴 +6.7% | <details><summary>Baseline details</summary> Latest main `33bd07b` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 383 tuples/sec | 415 tuples/sec | 736.99 tuples/sec | -7.7% | -48.0% | | bs=10 sw=10 sl=64 | MB/s | 0.233 MB/s | 0.253 MB/s | 0.45 MB/s | -7.9% | -48.2% | | bs=10 sw=10 sl=64 | p50 | 24,993 us | 22,593 us | 13,174 us | +10.6% | +89.7% | | bs=10 sw=10 sl=64 | p95 | 31,659 us | 34,954 us | 16,900 us | -9.4% | +87.3% | | bs=10 sw=10 sl=64 | p99 | 31,659 us | 34,954 us | 19,889 us | -9.4% | +59.2% | | bs=100 sw=10 sl=64 | throughput | 805 tuples/sec | 813 tuples/sec | 946.47 tuples/sec | -1.0% | -14.9% | | bs=100 sw=10 sl=64 | MB/s | 0.491 MB/s | 0.496 MB/s | 0.578 MB/s | -1.0% | -15.0% | | bs=100 sw=10 sl=64 | p50 | 124,684 us | 120,867 us | 105,257 us | +3.2% | +18.5% | | bs=100 sw=10 sl=64 | p95 | 136,774 us | 145,177 us | 112,150 us | -5.8% | +22.0% | | bs=100 sw=10 sl=64 | p99 | 136,774 us | 145,177 us | 125,962 us | -5.8% | +8.6% | | bs=1000 sw=10 sl=64 | throughput | 909 tuples/sec | 914 tuples/sec | 973.64 tuples/sec | -0.5% | -6.6% | | bs=1000 sw=10 sl=64 | MB/s | 0.555 MB/s | 0.558 MB/s | 0.594 MB/s | -0.5% | -6.6% | | bs=1000 sw=10 sl=64 | p50 | 1,101,138 us | 1,085,086 us | 1,032,217 us | +1.5% | +6.7% | | bs=1000 sw=10 sl=64 | p95 | 1,137,272 us | 1,158,909 us | 1,072,497 us | -1.9% | +6.0% | | bs=1000 sw=10 sl=64 | p99 | 1,137,272 us | 1,158,909 us | 1,102,623 us | -1.9% | +3.1% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,522.84,200,128000,383,0.233,24992.72,31659.45,31659.45 1,100,10,64,20,2483.69,2000,1280000,805,0.491,124683.61,136773.92,136773.92 2,1000,10,64,20,21997.44,20000,12800000,909,0.555,1101137.88,1137272.09,1137272.09 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
