github-actions[bot] commented on PR #8912: URL: https://github.com/apache/texera/pull/8912#issuecomment-6045354270
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 4 better · 🔴 2 worse · ⚪ 9 noise (<±5%) · 0 without baseline > Compared against main `4c982a7` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/37671698344) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 353 | 0.215 | 26,239/36,799/36,799 us | 🟢 -7.2% / 🔴 +171.2% | | 🟢 | bs=100 sw=10 sl=64 | 795 | 0.485 | 124,126/143,188/143,188 us | 🟢 -5.3% / 🔴 +52.5% | | ⚪ | bs=1000 sw=10 sl=64 | 914 | 0.558 | 1,087,674/1,210,795/1,210,795 us | ⚪ within ±5% / 🔴 +33.4% | <details><summary>Baseline details</summary> Latest main `4c982a7` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 353 tuples/sec | 372 tuples/sec | 960.16 tuples/sec | -5.1% | -63.2% | | bs=10 sw=10 sl=64 | MB/s | 0.215 MB/s | 0.227 MB/s | 0.586 MB/s | -5.3% | -63.3% | | bs=10 sw=10 sl=64 | p50 | 26,239 us | 25,109 us | 11,059 us | +4.5% | +137.3% | | bs=10 sw=10 sl=64 | p95 | 36,799 us | 39,638 us | 13,567 us | -7.2% | +171.2% | | bs=10 sw=10 sl=64 | p99 | 36,799 us | 39,638 us | 16,824 us | -7.2% | +118.7% | | bs=100 sw=10 sl=64 | throughput | 795 tuples/sec | 801 tuples/sec | 1,235 tuples/sec | -0.7% | -35.6% | | bs=100 sw=10 sl=64 | MB/s | 0.485 MB/s | 0.489 MB/s | 0.754 MB/s | -0.8% | -35.6% | | bs=100 sw=10 sl=64 | p50 | 124,126 us | 122,720 us | 87,809 us | +1.1% | +41.4% | | bs=100 sw=10 sl=64 | p95 | 143,188 us | 151,179 us | 93,907 us | -5.3% | +52.5% | | bs=100 sw=10 sl=64 | p99 | 143,188 us | 151,179 us | 106,076 us | -5.3% | +35.0% | | bs=1000 sw=10 sl=64 | throughput | 914 tuples/sec | 925 tuples/sec | 1,272 tuples/sec | -1.2% | -28.1% | | bs=1000 sw=10 sl=64 | MB/s | 0.558 MB/s | 0.565 MB/s | 0.776 MB/s | -1.2% | -28.1% | | bs=1000 sw=10 sl=64 | p50 | 1,087,674 us | 1,077,373 us | 863,168 us | +1.0% | +26.0% | | bs=1000 sw=10 sl=64 | p95 | 1,210,795 us | 1,156,635 us | 907,700 us | +4.7% | +33.4% | | bs=1000 sw=10 sl=64 | p99 | 1,210,795 us | 1,156,635 us | 933,684 us | +4.7% | +29.7% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,567.20,200,128000,353,0.215,26239.19,36799.46,36799.46 1,100,10,64,20,2514.48,2000,1280000,795,0.485,124125.88,143188.41,143188.41 2,1000,10,64,20,21872.85,20000,12800000,914,0.558,1087674.27,1210795.01,1210795.01 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
