github-actions[bot] commented on PR #8959: URL: https://github.com/apache/texera/pull/8959#issuecomment-6117794764
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 2 better · 🔴 6 worse · ⚪ 7 noise (<±5%) · 0 without baseline > Compared against main `a182a23` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/38202606173) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 382 | 0.233 | 24,937/35,072/35,072 us | 🟢 -7.9% / 🔴 +123.9% | | 🔴 | bs=100 sw=10 sl=64 | 781 | 0.477 | 125,335/161,255/161,255 us | 🔴 +14.1% / 🔴 +50.9% | | ⚪ | bs=1000 sw=10 sl=64 | 917 | 0.559 | 1,084,836/1,187,180/1,187,180 us | ⚪ within ±5% / 🔴 +16.0% | <details><summary>Baseline details</summary> Latest main `a182a23` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 382 tuples/sec | 387 tuples/sec | 782.27 tuples/sec | -1.3% | -51.2% | | bs=10 sw=10 sl=64 | MB/s | 0.233 MB/s | 0.236 MB/s | 0.477 MB/s | -1.3% | -51.2% | | bs=10 sw=10 sl=64 | p50 | 24,937 us | 23,492 us | 12,538 us | +6.2% | +98.9% | | bs=10 sw=10 sl=64 | p95 | 35,072 us | 38,100 us | 15,667 us | -7.9% | +123.9% | | bs=10 sw=10 sl=64 | p99 | 35,072 us | 38,100 us | 19,058 us | -7.9% | +84.0% | | bs=100 sw=10 sl=64 | throughput | 781 tuples/sec | 834 tuples/sec | 1,010 tuples/sec | -6.4% | -22.7% | | bs=100 sw=10 sl=64 | MB/s | 0.477 MB/s | 0.509 MB/s | 0.616 MB/s | -6.3% | -22.6% | | bs=100 sw=10 sl=64 | p50 | 125,335 us | 117,722 us | 100,043 us | +6.5% | +25.3% | | bs=100 sw=10 sl=64 | p95 | 161,255 us | 141,270 us | 106,848 us | +14.1% | +50.9% | | bs=100 sw=10 sl=64 | p99 | 161,255 us | 141,270 us | 121,073 us | +14.1% | +33.2% | | bs=1000 sw=10 sl=64 | throughput | 917 tuples/sec | 920 tuples/sec | 1,041 tuples/sec | -0.3% | -11.9% | | bs=1000 sw=10 sl=64 | MB/s | 0.559 MB/s | 0.561 MB/s | 0.635 MB/s | -0.4% | -12.0% | | bs=1000 sw=10 sl=64 | p50 | 1,084,836 us | 1,087,663 us | 980,364 us | -0.3% | +10.7% | | bs=1000 sw=10 sl=64 | p95 | 1,187,180 us | 1,152,299 us | 1,023,796 us | +3.0% | +16.0% | | bs=1000 sw=10 sl=64 | p99 | 1,187,180 us | 1,152,299 us | 1,046,281 us | +3.0% | +13.5% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,523.83,200,128000,382,0.233,24936.69,35072.27,35072.27 1,100,10,64,20,2561.46,2000,1280000,781,0.477,125334.63,161255.38,161255.38 2,1000,10,64,20,21818.15,20000,12800000,917,0.559,1084836.10,1187180.15,1187180.15 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
