github-actions[bot] commented on PR #8988: URL: https://github.com/apache/texera/pull/8988#issuecomment-6180557176
<!-- texera-benchmarks-comment --> ## ⚠️ Benchmark changes need a look 🟢 4 better · 🔴 5 worse · ⚪ 6 noise (<±5%) · 0 without baseline > Compared against main `6a29c59` benchmarked on **this same runner**, so the delta is largely free of cross-runner hardware noise. The "7d avg" column still reflects the gh-pages dashboard. Treat <±5% as noise unless repeated. [Dashboard](https://apache.github.io/texera/dev/bench/) · [Run](https://github.com/apache/texera/actions/runs/38630374269) | | config | throughput | MB/s | latency | max Δ latest / 7d | |---|---|---:|---:|---:|---:| | 🔴 | bs=10 sw=10 sl=64 | 372 | 0.227 | 26,487/32,889/32,889 us | 🔴 +14.7% / 🔴 +118.4% | | 🟢 | bs=100 sw=10 sl=64 | 780 | 0.476 | 126,351/144,256/144,256 us | 🟢 -10.0% / 🔴 +38.5% | | 🔴 | bs=1000 sw=10 sl=64 | 910 | 0.556 | 1,099,987/1,181,077/1,181,077 us | 🔴 +5.9% / 🔴 +19.9% | <details><summary>Baseline details</summary> Latest main `6a29c59` from same runner | config | metric | PR | latest main | 7d avg | Δ latest | Δ 7d | |---|---|---:|---:|---:|---:|---:| | bs=10 sw=10 sl=64 | throughput | 372 tuples/sec | 416 tuples/sec | 822.11 tuples/sec | -10.6% | -54.8% | | bs=10 sw=10 sl=64 | MB/s | 0.227 MB/s | 0.254 MB/s | 0.502 MB/s | -10.6% | -54.8% | | bs=10 sw=10 sl=64 | p50 | 26,487 us | 23,097 us | 12,129 us | +14.7% | +118.4% | | bs=10 sw=10 sl=64 | p95 | 32,889 us | 36,357 us | 15,469 us | -9.5% | +112.6% | | bs=10 sw=10 sl=64 | p99 | 32,889 us | 36,357 us | 18,357 us | -9.5% | +79.2% | | bs=100 sw=10 sl=64 | throughput | 780 tuples/sec | 804 tuples/sec | 1,058 tuples/sec | -3.0% | -26.3% | | bs=100 sw=10 sl=64 | MB/s | 0.476 MB/s | 0.491 MB/s | 0.646 MB/s | -3.1% | -26.3% | | bs=100 sw=10 sl=64 | p50 | 126,351 us | 122,623 us | 97,399 us | +3.0% | +29.7% | | bs=100 sw=10 sl=64 | p95 | 144,256 us | 160,241 us | 104,184 us | -10.0% | +38.5% | | bs=100 sw=10 sl=64 | p99 | 144,256 us | 160,241 us | 117,615 us | -10.0% | +22.7% | | bs=1000 sw=10 sl=64 | throughput | 910 tuples/sec | 932 tuples/sec | 1,099 tuples/sec | -2.4% | -17.2% | | bs=1000 sw=10 sl=64 | MB/s | 0.556 MB/s | 0.569 MB/s | 0.671 MB/s | -2.3% | -17.1% | | bs=1000 sw=10 sl=64 | p50 | 1,099,987 us | 1,070,663 us | 946,743 us | +2.7% | +16.2% | | bs=1000 sw=10 sl=64 | p95 | 1,181,077 us | 1,115,452 us | 985,437 us | +5.9% | +19.9% | | bs=1000 sw=10 sl=64 | p99 | 1,181,077 us | 1,115,452 us | 1,012,622 us | +5.9% | +16.6% | </details> <details><summary>Raw CSV</summary> ```csv config_idx,batch_size,schema_width,string_len,num_batches,total_ms,total_tuples,total_bytes,tuples_per_sec,mb_per_sec,lat_p50_us,lat_p95_us,lat_p99_us 0,10,10,64,20,537.64,200,128000,372,0.227,26486.87,32888.69,32888.69 1,100,10,64,20,2564.22,2000,1280000,780,0.476,126350.85,144256.30,144256.30 2,1000,10,64,20,21973.02,20000,12800000,910,0.556,1099986.52,1181076.82,1181076.82 ``` </details> -- This is an automated message from the Apache Git Service. To respond to the message, please log on to GitHub and use the URL above to go to the specific comment. To unsubscribe, e-mail: [email protected] For queries about this service, please contact Infrastructure at: [email protected]
