On 05.01.2016 20:31, Thomas Richter wrote: > Hi, > >> >> Try your luck here >> http://lists.freedesktop.org/mailman/listinfo/dri-devel > > The major problem is that there is no way to tell the nouveau kernel > module to enforce a specific output. There is a video=XXX kernel > parameter, but this only applies to the VGA framebuffer but not to the > nouveau framebuffer. >
Tested, in contrast to enablement, video=DVI-I-1:d becomes effective at the exact moment: fb: switching to nouveaufb from VESA VGA However this is a direct connection, without KVM switch. >> BTW what is actual KVM switch device, vendor/product? > > This is an ATEN CS22D. It is "supposed to remember the EDID data", but > frankly, it does not. > http://eservice.aten.com/eServiceCx/Common/FAQ/view.do?id=4746 "No, The CS22D/CS22U do not support Video Dynasync feature, it bypass's EDID." _______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau
