Hi, It would seem like it (attachments are from 4.9-rc1, btw), but it doesn't look like there is any support in the Xorg driver.
How can I help with that? Best regards, Sune Mølgaard Translucent ApS On 2016-04-22 09:33, Pierre Moreau wrote: > Hello, > > A patch was merged yesterday to recognise GM108 (see > https://github.com/skeggsb/nouveau/commit/3da1f2a19e5e8dc8d68a4400d9cca01c64ecd59e). > I guess it will make it into 4.7. > > Pierre
lspci -vvvv
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
Subsystem: Lenovo Broadwell-U Host Bridge -OPI
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: bdw_uncore
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated
Graphics (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Broadwell-U Integrated Graphics
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=512M]
Region 4: I/O ports at 4000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
Subsystem: Lenovo Broadwell-U Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at f4230000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller
(rev 03) (prog-if 30 [XHCI])
Subsystem: Lenovo Wildcat Point-LP USB xHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f4220000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI
Controller #1 (rev 03)
Subsystem: Lenovo Wildcat Point-LP MEI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f4239000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection (3) I218-V
(rev 03)
Subsystem: Lenovo Ethernet Connection (3) I218-V
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f423e000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio
Controller (rev 03)
Subsystem: Lenovo Wildcat Point-LP High Definition Audio Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f4234000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #6
(rev e3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f4100000-f41fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3
(rev e3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f4000000-f40fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5
(rev e3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f3000000-f3ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller
(rev 03) (prog-if 20 [EHCI])
Subsystem: Lenovo Wildcat Point-LP USB EHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f423d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
Subsystem: Lenovo Wildcat Point-LP LPC Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller
[AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Wildcat Point-LP SATA Controller [AHCI Mode]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 40a8 [size=8]
Region 1: I/O ports at 40b4 [size=4]
Region 2: I/O ports at 40a0 [size=8]
Region 3: I/O ports at 40b0 [size=4]
Region 4: I/O ports at 4060 [size=32]
Region 5: Memory at f423c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
Subsystem: Lenovo Wildcat Point-LP SMBus Controller
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f4238000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
Kernel modules: i2c_i801
00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP
Thermal Management Controller (rev 03)
Subsystem: Lenovo Wildcat Point-LP Thermal Management Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f423b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel_pch_thermal
Kernel modules: intel_pch_thermal
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI
Express Card Reader (rev 01)
Subsystem: Lenovo RTS5227 PCI Express Card Reader
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
Kernel modules: rtsx_pci
03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 99)
Subsystem: Intel Corporation Dual Band Wireless-AC 7265
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
08:00.0 3D controller: NVIDIA Corporation GM108GLM [Quadro K620M] (rev a2)
Subsystem: Lenovo GM108GLM [Quadro K620M]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 3000 [size=128]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nvidiafb, nouveau
dmesg |egrep -i "nouveau|nvidia" [ 1.893467] nouveau: detected PR support, will not use DSM [ 1.893677] nouveau 0000:08:00.0: NVIDIA GM108 (1183a0a2) [ 1.907342] nouveau 0000:08:00.0: bios: version 82.08.1f.00.03 [ 1.991211] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1d408200) [ 1.991212] nouveau 0000:08:00.0: fb: 2048 MiB DDR3 [ 3.269352] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB [ 3.269408] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB [ 3.269465] nouveau 0000:08:00.0: DRM: Pointer to TMDS table invalid [ 3.269523] nouveau 0000:08:00.0: DRM: DCB version 4.0 [ 3.269579] nouveau 0000:08:00.0: DRM: Pointer to flat panel table invalid [ 3.451054] nouveau 0000:08:00.0: DRM: MM: using COPY for buffer copies [ 3.451117] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on minor 0 [ 8.925115] nouveau 0000:08:00.0: DRM: evicting buffers... [ 8.925189] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go idle... [ 8.925283] nouveau 0000:08:00.0: DRM: suspending client object trees... [ 8.929091] nouveau 0000:08:00.0: DRM: suspending kernel object tree... [ 17.449259] hid_logitech_hidpp hid_logitech_dj usbhid hid crct10dif_pclmul rtsx_pci_sdmmc crc32_pclmul crc32c_intel mmc_core nouveau ghash_clmulni_intel aesni_intel mxm_wmi i2c_algo_bit aes_x86_64 ttm lrw gf128mul glue_helper drm_kms_helper ablk_helper cryptd syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops drm ahci libahci rtsx_pci e1000e ptp pps_core thermal wmi fjes video button [ 18.641499] nouveau 0000:08:00.0: DRM: resuming kernel object tree... [ 18.724503] nouveau 0000:08:00.0: priv: HUB0: 6013d4 badf573f (1f408200) [ 18.761491] nouveau 0000:08:00.0: priv: HUB0: 10ecc0 ffffffff (1d40822c) [ 18.761992] nouveau 0000:08:00.0: DRM: resuming client object trees... [ 26.025637] nouveau 0000:08:00.0: DRM: evicting buffers... [ 26.025639] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go idle... [ 26.025662] nouveau 0000:08:00.0: DRM: suspending client object trees... [ 26.029451] nouveau 0000:08:00.0: DRM: suspending kernel object tree...
[ 20.874] X.Org X Server 1.18.4 Release Date: 2016-07-19 [ 20.874] X Protocol Version 11, Revision 0 [ 20.874] Build Operating System: Linux 3.13.0-95-generic x86_64 Ubuntu [ 20.874] Current Operating System: Linux dell-smo 4.9.0-040900rc1-generic #201610151630 SMP Sat Oct 15 20:33:39 UTC 2016 x86_64 [ 20.874] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-040900rc1-generic root=UUID=a9421b5e-ff3f-4ebd-8f9f-13d24c76ba34 ro cryptopts=target=sda6_crypt,source=/dev/disk/by-uuid/64096e82-f7f4-4917-80df-e123aa15a022,discard vt.handoff=7 [ 20.874] Build Date: 14 September 2016 03:33:24PM [ 20.874] xorg-server 2:1.18.4-0ubuntu0.1 (For technical support please see http://www.ubuntu.com/support) [ 20.874] Current version of pixman: 0.33.6 [ 20.874] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 20.874] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 20.874] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct 18 09:21:13 2016 [ 20.877] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 20.881] (==) No Layout section. Using the first Screen section. [ 20.881] (==) No screen section available. Using defaults. [ 20.881] (**) |-->Screen "Default Screen Section" (0) [ 20.881] (**) | |-->Monitor "<default monitor>" [ 20.882] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 20.882] (==) Automatically adding devices [ 20.882] (==) Automatically enabling devices [ 20.882] (==) Automatically adding GPU devices [ 20.882] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 20.889] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 20.889] Entry deleted from font path. [ 20.892] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 20.892] Entry deleted from font path. [ 20.893] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 20.893] Entry deleted from font path. [ 20.893] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 20.893] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 20.893] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 20.894] (II) Loader magic: 0x563366d65dc0 [ 20.894] (II) Module ABI versions: [ 20.894] X.Org ANSI C Emulation: 0.4 [ 20.894] X.Org Video Driver: 20.0 [ 20.894] X.Org XInput driver : 22.1 [ 20.894] X.Org Server Extension : 9.0 [ 20.895] (++) using VT number 7 [ 20.895] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 20.895] (II) xfree86: Adding drm device (/dev/dri/card1) [ 20.910] (II) xfree86: Adding drm device (/dev/dri/card0) [ 20.912] (--) PCI:*(0:0:2:0) 8086:1616:17aa:2225 rev 9, Mem @ 0xf2000000/16777216, 0xc0000000/536870912, I/O @ 0x00004000/64, BIOS @ 0x????????/131072 [ 20.912] (--) PCI: (0:8:0:0) 10de:137a:17aa:2225 rev 162, Mem @ 0xf3000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x00003000/128 [ 20.912] (II) LoadModule: "glx" [ 20.936] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 20.980] (II) Module glx: vendor="X.Org Foundation" [ 20.980] compiled for 1.18.4, module version = 1.0.0 [ 20.980] ABI class: X.Org Server Extension, version 9.0 [ 20.980] (==) AIGLX enabled [ 20.980] (==) Matched intel as autoconfigured driver 0 [ 20.980] (==) Matched nvidia as autoconfigured driver 1 [ 20.980] (==) Matched nouveau as autoconfigured driver 2 [ 20.980] (==) Matched intel as autoconfigured driver 3 [ 20.980] (==) Matched modesetting as autoconfigured driver 4 [ 20.980] (==) Matched fbdev as autoconfigured driver 5 [ 20.980] (==) Matched vesa as autoconfigured driver 6 [ 20.980] (==) Assigned the driver to the xf86ConfigLayout [ 20.980] (II) LoadModule: "intel" [ 20.983] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 20.988] (II) Module intel: vendor="X.Org Foundation" [ 20.988] compiled for 1.18.4, module version = 2.99.917 [ 20.988] Module class: X.Org Video Driver [ 20.988] ABI class: X.Org Video Driver, version 20.0 [ 20.988] (II) LoadModule: "nvidia" [ 20.991] (WW) Warning, couldn't open module nvidia [ 20.991] (II) UnloadModule: "nvidia" [ 20.991] (II) Unloading nvidia [ 20.991] (EE) Failed to load module "nvidia" (module does not exist, 0) [ 20.991] (II) LoadModule: "nouveau" [ 20.991] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 20.994] (II) Module nouveau: vendor="X.Org Foundation" [ 20.994] compiled for 1.18.3, module version = 1.0.13 [ 20.994] Module class: X.Org Video Driver [ 20.994] ABI class: X.Org Video Driver, version 20.0 [ 20.994] (II) LoadModule: "modesetting" [ 20.994] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 20.995] (II) Module modesetting: vendor="X.Org Foundation" [ 20.995] compiled for 1.18.4, module version = 1.18.4 [ 20.995] Module class: X.Org Video Driver [ 20.995] ABI class: X.Org Video Driver, version 20.0 [ 20.995] (II) LoadModule: "fbdev" [ 20.995] (WW) Warning, couldn't open module fbdev [ 20.995] (II) UnloadModule: "fbdev" [ 20.995] (II) Unloading fbdev [ 20.995] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 20.995] (II) LoadModule: "vesa" [ 20.995] (WW) Warning, couldn't open module vesa [ 20.995] (II) UnloadModule: "vesa" [ 20.995] (II) Unloading vesa [ 20.995] (EE) Failed to load module "vesa" (module does not exist, 0) [ 20.995] (==) Matched intel as autoconfigured driver 0 [ 20.995] (==) Matched nvidia as autoconfigured driver 1 [ 20.995] (==) Matched nouveau as autoconfigured driver 2 [ 20.995] (==) Matched intel as autoconfigured driver 3 [ 20.995] (==) Matched modesetting as autoconfigured driver 4 [ 20.995] (==) Matched fbdev as autoconfigured driver 5 [ 20.995] (==) Matched vesa as autoconfigured driver 6 [ 20.995] (==) Assigned the driver to the xf86ConfigLayout [ 20.995] (II) LoadModule: "intel" [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 20.996] (II) Module intel: vendor="X.Org Foundation" [ 20.996] compiled for 1.18.4, module version = 2.99.917 [ 20.996] Module class: X.Org Video Driver [ 20.996] ABI class: X.Org Video Driver, version 20.0 [ 20.996] (II) UnloadModule: "intel" [ 20.996] (II) Unloading intel [ 20.996] (II) Failed to load module "intel" (already loaded, 22067) [ 20.996] (II) LoadModule: "nvidia" [ 20.996] (WW) Warning, couldn't open module nvidia [ 20.996] (II) UnloadModule: "nvidia" [ 20.996] (II) Unloading nvidia [ 20.996] (EE) Failed to load module "nvidia" (module does not exist, 0) [ 20.996] (II) LoadModule: "nouveau" [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so [ 20.996] (II) Module nouveau: vendor="X.Org Foundation" [ 20.996] compiled for 1.18.3, module version = 1.0.13 [ 20.996] Module class: X.Org Video Driver [ 20.996] ABI class: X.Org Video Driver, version 20.0 [ 20.996] (II) UnloadModule: "nouveau" [ 20.996] (II) Unloading nouveau [ 20.996] (II) Failed to load module "nouveau" (already loaded, 0) [ 20.996] (II) LoadModule: "modesetting" [ 20.996] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 20.996] (II) Module modesetting: vendor="X.Org Foundation" [ 20.996] compiled for 1.18.4, module version = 1.18.4 [ 20.996] Module class: X.Org Video Driver [ 20.996] ABI class: X.Org Video Driver, version 20.0 [ 20.996] (II) UnloadModule: "modesetting" [ 20.996] (II) Unloading modesetting [ 20.996] (II) Failed to load module "modesetting" (already loaded, 0) [ 20.996] (II) LoadModule: "fbdev" [ 20.996] (WW) Warning, couldn't open module fbdev [ 20.996] (II) UnloadModule: "fbdev" [ 20.996] (II) Unloading fbdev [ 20.996] (EE) Failed to load module "fbdev" (module does not exist, 0) [ 20.996] (II) LoadModule: "vesa" [ 20.997] (WW) Warning, couldn't open module vesa [ 20.997] (II) UnloadModule: "vesa" [ 20.997] (II) Unloading vesa [ 20.997] (EE) Failed to load module "vesa" (module does not exist, 0) [ 20.997] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 20.997] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 20.997] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 20.997] (II) NOUVEAU driver [ 20.997] (II) NOUVEAU driver for NVIDIA chipset families : [ 20.997] RIVA TNT (NV04) [ 20.997] RIVA TNT2 (NV05) [ 20.997] GeForce 256 (NV10) [ 20.997] GeForce 2 (NV11, NV15) [ 20.997] GeForce 4MX (NV17, NV18) [ 20.997] GeForce 3 (NV20) [ 20.997] GeForce 4Ti (NV25, NV28) [ 20.997] GeForce FX (NV3x) [ 20.997] GeForce 6 (NV4x) [ 20.997] GeForce 7 (G7x) [ 20.997] GeForce 8 (G8x) [ 20.997] GeForce GTX 200 (NVA0) [ 20.997] GeForce GTX 400 (NVC0) [ 20.997] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 21.020] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919 [ 21.020] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git1610121931.eb01cc~gd~x (Oibaf <fmrum...@gmail.com>) [ 21.020] (II) intel(0): SNA compiled for use with valgrind [ 21.022] (II) [drm] nouveau interface version: 1.3.1 [ 21.022] (EE) Unknown chipset: NV118 [ 21.022] (WW) Falling back to old probe method for modesetting [ 21.024] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5500 [ 21.024] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads [ 21.024] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 21.024] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 21.024] (==) intel(0): RGB weight 888 [ 21.024] (==) intel(0): Default visual is TrueColor [ 21.024] (II) intel(0): Output eDP1 has no monitor section [ 21.052] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1 [ 21.052] (II) intel(0): Enabled output eDP1 [ 21.052] (II) intel(0): Output DP1 has no monitor section [ 21.052] (II) intel(0): Enabled output DP1 [ 21.052] (II) intel(0): Output HDMI1 has no monitor section [ 21.052] (II) intel(0): Enabled output HDMI1 [ 21.052] (II) intel(0): Output DP2 has no monitor section [ 21.052] (II) intel(0): Enabled output DP2 [ 21.052] (II) intel(0): Output HDMI2 has no monitor section [ 21.052] (II) intel(0): Enabled output HDMI2 [ 21.052] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 21.052] (II) intel(0): Output VIRTUAL1 has no monitor section [ 21.052] (II) intel(0): Enabled output VIRTUAL1 [ 21.052] (--) intel(0): Output eDP1 using initial mode 2880x1620 on pipe 0 [ 21.052] (--) intel(0): Output DP1 using initial mode 2560x1440 on pipe 1 [ 21.052] (==) intel(0): TearFree enabled [ 21.052] (==) intel(0): DPI set to (96, 96) [ 21.052] (II) Loading sub module "dri2" [ 21.052] (II) LoadModule: "dri2" [ 21.053] (II) Module "dri2" already built-in [ 21.053] (II) Loading sub module "present" [ 21.053] (II) LoadModule: "present" [ 21.053] (II) Module "present" already built-in [ 21.053] (==) Depth 24 pixmap format is 32 bpp [ 21.058] (II) intel(0): SNA initialized with Broadwell (gen8) backend [ 21.058] (==) intel(0): Backing store enabled [ 21.058] (==) intel(0): Silken mouse enabled [ 21.060] (II) intel(0): HW Cursor enabled [ 21.060] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 21.061] (==) intel(0): DPMS enabled [ 21.061] (==) intel(0): Display hotplug detection enabled [ 21.061] (II) intel(0): [DRI2] Setup complete [ 21.061] (II) intel(0): [DRI2] DRI driver: i965 [ 21.061] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 21.061] (II) intel(0): direct rendering: DRI2 enabled [ 21.061] (II) intel(0): hardware support for Present enabled [ 21.061] (--) RandR disabled [ 21.067] (II) SELinux: Disabled on system [ 21.115] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 21.115] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 21.115] (II) AIGLX: enabled GLX_INTEL_swap_event [ 21.115] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 21.115] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 21.115] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 21.115] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 21.115] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 21.115] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 21.116] (II) AIGLX: Loaded and initialized i965 [ 21.116] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 21.125] (II) intel(0): switch to mode 2880x1620@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none [ 21.126] (II) intel(0): switch to mode 2560x1440@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none [ 21.127] (II) intel(0): Setting screen physical size to 762 x 428 [ 21.271] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 21.276] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 21.276] (II) LoadModule: "evdev" [ 21.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 21.279] (II) Module evdev: vendor="X.Org Foundation" [ 21.280] compiled for 1.18.1, module version = 2.10.1 [ 21.280] Module class: X.Org XInput Driver [ 21.280] ABI class: X.Org XInput driver, version 22.1 [ 21.280] (II) Using input driver 'evdev' for 'Power Button' [ 21.280] (**) Power Button: always reports core events [ 21.280] (**) evdev: Power Button: Device: "/dev/input/event3" [ 21.280] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 21.280] (--) evdev: Power Button: Found keys [ 21.280] (II) evdev: Power Button: Configuring as keyboard [ 21.280] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3" [ 21.280] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 21.280] (**) Option "xkb_rules" "evdev" [ 21.280] (**) Option "xkb_model" "pc105" [ 21.280] (**) Option "xkb_layout" "dk" [ 21.359] (II) config/udev: Adding input device Video Bus (/dev/input/event15) [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 21.359] (II) Using input driver 'evdev' for 'Video Bus' [ 21.359] (**) Video Bus: always reports core events [ 21.359] (**) evdev: Video Bus: Device: "/dev/input/event15" [ 21.359] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 21.359] (--) evdev: Video Bus: Found keys [ 21.359] (II) evdev: Video Bus: Configuring as keyboard [ 21.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event15" [ 21.359] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 21.359] (**) Option "xkb_rules" "evdev" [ 21.359] (**) Option "xkb_model" "pc105" [ 21.359] (**) Option "xkb_layout" "dk" [ 21.359] (II) config/udev: Adding input device Video Bus (/dev/input/event16) [ 21.359] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 21.361] (II) Using input driver 'evdev' for 'Video Bus' [ 21.361] (**) Video Bus: always reports core events [ 21.361] (**) evdev: Video Bus: Device: "/dev/input/event16" [ 21.361] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 21.361] (--) evdev: Video Bus: Found keys [ 21.361] (II) evdev: Video Bus: Configuring as keyboard [ 21.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input17/event16" [ 21.361] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 21.361] (**) Option "xkb_rules" "evdev" [ 21.361] (**) Option "xkb_model" "pc105" [ 21.361] (**) Option "xkb_layout" "dk" [ 21.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event1) [ 21.362] (II) No input driver specified, ignoring this device. [ 21.362] (II) This device may have been added with another device file. [ 21.362] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 21.362] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 21.362] (II) Using input driver 'evdev' for 'Sleep Button' [ 21.362] (**) Sleep Button: always reports core events [ 21.362] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 21.362] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 21.364] (--) evdev: Sleep Button: Found keys [ 21.364] (II) evdev: Sleep Button: Configuring as keyboard [ 21.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2" [ 21.364] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 21.364] (**) Option "xkb_rules" "evdev" [ 21.364] (**) Option "xkb_model" "pc105" [ 21.364] (**) Option "xkb_layout" "dk" [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event18) [ 21.365] (II) No input driver specified, ignoring this device. [ 21.365] (II) This device may have been added with another device file. [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event19) [ 21.365] (II) No input driver specified, ignoring this device. [ 21.365] (II) This device may have been added with another device file. [ 21.365] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event20) [ 21.365] (II) No input driver specified, ignoring this device. [ 21.365] (II) This device may have been added with another device file. [ 21.366] (II) config/udev: Adding input device Logitech M705 (/dev/input/event4) [ 21.366] (**) Logitech M705: Applying InputClass "evdev pointer catchall" [ 21.366] (II) Using input driver 'evdev' for 'Logitech M705' [ 21.366] (**) Logitech M705: always reports core events [ 21.366] (**) evdev: Logitech M705: Device: "/dev/input/event4" [ 21.366] (--) evdev: Logitech M705: Vendor 0x46d Product 0x101b [ 21.366] (--) evdev: Logitech M705: Found 20 mouse buttons [ 21.366] (--) evdev: Logitech M705: Found scroll wheel(s) [ 21.366] (--) evdev: Logitech M705: Found relative axes [ 21.366] (--) evdev: Logitech M705: Found x and y relative axes [ 21.366] (II) evdev: Logitech M705: Configuring as mouse [ 21.366] (II) evdev: Logitech M705: Adding scrollwheel support [ 21.366] (**) evdev: Logitech M705: YAxisMapping: buttons 4 and 5 [ 21.366] (**) evdev: Logitech M705: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 21.366] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input6/event4" [ 21.366] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 10) [ 21.366] (II) evdev: Logitech M705: initialized for relative axes. [ 21.366] (**) Logitech M705: (accel) keeping acceleration scheme 1 [ 21.366] (**) Logitech M705: (accel) acceleration profile 0 [ 21.366] (**) Logitech M705: (accel) acceleration factor: 2.000 [ 21.366] (**) Logitech M705: (accel) acceleration threshold: 4 [ 21.367] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse0) [ 21.367] (II) No input driver specified, ignoring this device. [ 21.367] (II) This device may have been added with another device file. [ 21.367] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event6) [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall" [ 21.367] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )' [ 21.367] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events [ 21.367] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event6" [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b [ 21.367] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys [ 21.367] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard [ 21.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.0/0003:04B3:301B.0005/input/input8/event6" [ 21.367] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 11) [ 21.367] (**) Option "xkb_rules" "evdev" [ 21.367] (**) Option "xkb_model" "pc105" [ 21.367] (**) Option "xkb_layout" "dk" [ 21.368] (II) config/udev: Adding input device Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ) (/dev/input/event7) [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Applying InputClass "evdev keyboard catchall" [ 21.368] (II) Using input driver 'evdev' for 'Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )' [ 21.368] (**) Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): always reports core events [ 21.368] (**) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Device: "/dev/input/event7" [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Vendor 0x4b3 Product 0x301b [ 21.368] (--) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Found keys [ 21.368] (II) evdev: Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 ): Configuring as keyboard [ 21.368] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2.2/2-2.2.1/2-2.2.1:1.1/0003:04B3:301B.0006/input/input9/event7" [ 21.368] (II) XINPUT: Adding extended input device "Lite-On Technology USB Productivity Option Keyboard( has the hub in # 1 )" (type: KEYBOARD, id 12) [ 21.368] (**) Option "xkb_rules" "evdev" [ 21.368] (**) Option "xkb_model" "pc105" [ 21.368] (**) Option "xkb_layout" "dk" [ 21.369] (II) config/udev: Adding input device Integrated Camera (/dev/input/event17) [ 21.369] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall" [ 21.369] (II) Using input driver 'evdev' for 'Integrated Camera' [ 21.369] (**) Integrated Camera: always reports core events [ 21.369] (**) evdev: Integrated Camera: Device: "/dev/input/event17" [ 21.369] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x366 [ 21.369] (--) evdev: Integrated Camera: Found keys [ 21.369] (II) evdev: Integrated Camera: Configuring as keyboard [ 21.369] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18/event17" [ 21.369] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 13) [ 21.369] (**) Option "xkb_rules" "evdev" [ 21.369] (**) Option "xkb_model" "pc105" [ 21.369] (**) Option "xkb_layout" "dk" [ 21.370] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10) [ 21.370] (II) No input driver specified, ignoring this device. [ 21.370] (II) This device may have been added with another device file. [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11) [ 21.370] (II) No input driver specified, ignoring this device. [ 21.370] (II) This device may have been added with another device file. [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12) [ 21.370] (II) No input driver specified, ignoring this device. [ 21.370] (II) This device may have been added with another device file. [ 21.370] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event13) [ 21.370] (II) No input driver specified, ignoring this device. [ 21.370] (II) This device may have been added with another device file. [ 21.375] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14) [ 21.375] (II) No input driver specified, ignoring this device. [ 21.375] (II) This device may have been added with another device file. [ 21.375] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 21.375] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 21.375] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 21.375] (**) AT Translated Set 2 keyboard: always reports core events [ 21.375] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 21.375] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 21.375] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 21.375] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 21.375] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14) [ 21.375] (**) Option "xkb_rules" "evdev" [ 21.375] (**) Option "xkb_model" "pc105" [ 21.375] (**) Option "xkb_layout" "dk" [ 21.376] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5) [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall" [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 21.376] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 21.376] (II) LoadModule: "synaptics" [ 21.376] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 21.381] (II) Module synaptics: vendor="X.Org Foundation" [ 21.381] compiled for 1.18.1, module version = 1.8.2 [ 21.381] Module class: X.Org XInput Driver [ 21.381] ABI class: X.Org XInput driver, version 22.1 [ 21.381] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 21.381] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 21.381] (**) Option "Device" "/dev/input/event5" [ 21.464] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - 5676 (res 45) [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - 4758 (res 68) [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 21.464] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 21.464] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 21.464] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 21.500] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5" [ 21.500] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15) [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 21.500] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035 [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 21.500] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 21.500] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 21.500] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1) [ 21.500] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8) [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall" [ 21.501] (**) TPPS/2 IBM TrackPoint: Applying InputClass "trackpoint catchall" [ 21.501] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint' [ 21.501] (**) TPPS/2 IBM TrackPoint: always reports core events [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event8" [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes [ 21.501] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse [ 21.501] (**) Option "Emulate3Buttons" "true" [ 21.501] (**) Option "EmulateWheel" "true" [ 21.501] (**) Option "EmulateWheelButton" "2" [ 21.501] (**) Option "YAxisMapping" "4 5" [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5 [ 21.501] (**) Option "XAxisMapping" "6 7" [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7 [ 21.501] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 21.501] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input7/event8" [ 21.501] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16) [ 21.501] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes. [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1 [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0 [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000 [ 21.501] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4 [ 21.501] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse2) [ 21.501] (II) No input driver specified, ignoring this device. [ 21.501] (II) This device may have been added with another device file. [ 21.502] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9) [ 21.502] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall" [ 21.502] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons' [ 21.502] (**) ThinkPad Extra Buttons: always reports core events [ 21.502] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9" [ 21.502] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054 [ 21.502] (--) evdev: ThinkPad Extra Buttons: Found keys [ 21.502] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard [ 21.502] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input10/event9" [ 21.502] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17) [ 21.502] (**) Option "xkb_rules" "evdev" [ 21.502] (**) Option "xkb_model" "pc105" [ 21.502] (**) Option "xkb_layout" "dk" [ 23.053] (II) intel(0): EDID vendor "MEI", prod id 38562 [ 23.053] (II) intel(0): EDID quirk: Use maximum size instead of detailed timing sizes. [ 23.053] (II) intel(0): Using EDID range info for horizontal sync [ 23.053] (II) intel(0): Using EDID range info for vertical refresh [ 23.053] (II) intel(0): Printing DDC gathered Modelines: [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP) [ 23.053] (II) intel(0): Modeline "2880x1620"x0.0 302.50 2880 2924 2928 3076 1620 1629 1630 1967 +hsync +vsync (98.3 kHz e) [ 23.909] (II) intel(0): resizing framebuffer to 5440x1620 [ 23.960] (II) intel(0): switch to mode 2560x1440@60.0 on DP1 using pipe 1, position (2880, 0), rotation normal, reflection none
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/nouveau
